Conference abstractPublished 28 Nov 2020
Additive Manufacturing of Ceramic Components
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Dielectric ceramic components with micro lattice patterns were successfully fabricated by newly developed ultraviolet laser lithography. As an additive manufacturing, 2D cross sections were created through dewaxing and sintering by UV laser drawing on spread resin paste including ceramic nanoparticles, and 3D composite models were sterically printed by layer laminations [1-3]. As the row material of the lithography, ceramic nanoparticles from 500 nm in average diameters were dispersed in to photo sensitive liquid resins from 50 % in volume fraction. The resin paste was spread on a glass substrate at 50 μm in layer thickness by a mechanically moved knife edge. An ultraviolet laser beam of 355 nm in wavelength was adjusted at 10 μm in spot diameter and scanned on the pasted resin surface. Irradiation power was changed from 600 to 700 mW to obtain the enough solidification depth for 2D layer bonding. Scanning speed was changed from 50 to 100 mm/s to create fine lattice structures. The half wavelength of incident ultraviolet ray should be comparable with the nanoparticles gaps in the resin paste, therefore the dewaxing and sintering will be realized through the electro-magnetic waves resonations and localizations. Through the layer lamination, the 3D titania structures with 97% in volume fraction were fabricated as shown in the following image. The titania crystal structure was analyzed as dual phase of anatase and rutile. After the heat treatment at 1350 °C for 2 hs in the air atmosphere, titania components with rutile phase was obtained.
Keywords
Subjects
EngineeringAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalEuropean Journal of Applied Engineering and Scientific Research
- SubjectEngineering
- BylineArticles whose byline prints “Soshu Kirihara”
