Research article · 2021
Conference abstractPublished 16 Sep 2020
Bonded NdFeB magnets produced by selective laser sintering
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The production of complex-shaped bonded NdFeB (neodymium-iron-boron) magnets is a key element in the development of compact and efficient electromechanical devices. Due to constraints imposed by current manufacturing methods, geometrically complex magnets are high in cost and require long lead times. The use of additive manufacturing techniques for low volume production of complex geometries from a wide range of materials has been shown to dramatically decrease product cost and lead times. This work describes the production and characterisation of net-shaped bonded NdFeB magnets using selective laser sintering (SLS) from mechanically mixed powders. Net-shaped magnets, cuboids for geometrical measurements and cylinders for magnetic measurements, wereproducedusingmagneticpowderswithbothflakeandsphericalparticlemorphologiesmixedwithpolyamide-12. The powder loading fractions, which were based upon the ratio of the bulk density to the theoretical density of the individual magnetic powders, were 38% and 56%/ volume for the flake and spherical powders respectively. The mixed feedstock was processed using an experimental SLS machine equipped with a mechanically tracked 15 W solid state laser emitting radiation at a wavelength of 445 nm. The magnets were shown experimentally to possess a high level of geometrical accuracy (less than 0.15 mm deviation from model data) with magnetic properties comparable to permanent magnets produced using other additive manufacturing methods (residual induction of 284 and 357 mT, intrinsic coercivity of 661 and 735 kA/m for flake and spherical powders respectively). This work has demonstrated the feasibility of producing bonded magnets using SLS, allowing the possibility for the rapid, cost-effective production of geometrically complex magnets.
Subjects
EngineeringAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Research article · 27 Jul 2020
Selective laser sintering of three-dimensional geometries and structures of quartz glass - possibilities and limits
Conference abstract · 24 Nov 2020
Modelisation of the selective laser sintering process of polyamide 12
Conference abstract · 7 Oct 2013
Effect on mechanical properties in heat treated and non-heat treated EOS 17-4 GP1 stainless steel parts produced using direct metal laser sintering (DMLSTM)
Conference abstract · 7 Oct 2013
Analysis of grain structure and surface roughness in heat treated and nonheat treated EOS 17-4 GP1 stainless steel parts produced using direct metal laser sintering (DMLSTM)
More from this journal
The newest in European Journal of Applied Engineering and Scientific Research.
Article · 15 Jul 2024
Forging Futures with Integrated Electronics and Automation
Article · 15 Jan 2024
Emotion Recognition: An Emerging AI Technology
Article · 15 Jan 2024
Unleashing the Power of Quantum Possibilities
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalEuropean Journal of Applied Engineering and Scientific Research
- SubjectEngineering
- BylineArticles whose byline prints “Martin Mapley”
