Conference abstractPublished 15 Jun 2015
Design of a locking device for an SMA driven feed axis
Ruhr University Bochum, Germany
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
In a current research project, the Chair of Production Systems is examining the use of multiple modular and standardized shape memory alloy (SMA) actuators in the feed axis of a small machine tool. Three linear axes will be combined to achieve tool movements in three dimensions. Later on, these machines shall be used to manufacture small work pieces with high precision. Therefore, the axis must be qualified to handle movements in the micrometer range. In addition to investigating different measures to control the displacement of the actuators, a way to lock the axis to any desired position is needed. This enables the user to hold the axis in the same position for a period of time without heating the individual SMA actuators. Therefore the durability of the assembly will be increased. Further, this setup is beneficial for carrying out precise drilling operations and for isolating the movement of one of the three linear axes by locking down the other two. Considering the small dimensions of the axis assembly and the accompanying high demands on the manufacturing process, a simple lock bar mechanism was chosen. A brake pad is pressed against the base plate of the axis by a pressure spring. In order to deactivate the latching, the brake pad is pulled up by an SMA wire, the brake pad actuator. Afterwards the spring-powered lock bar moves under a shoulder and holds the brake pad in its upper position.
Ask about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- BylineArticles whose byline prints “Jan Pollmann”
