Conference abstract · 19 Feb 2018
Conference abstractPublished 1 Aug 2016
Geometry induced doping in thin si nano-grating layers
Ilia State University, Georgia
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Recently, new quantum features have been studied in the area of nanostructured layers. Nano-grating on the surface of the thin layer imposes additional boundary conditions on the electron wave function and induces G-doping or geometry doping. G-doping is equivalent to donor doping from the point of view of the increase in electron concentration ‘n’. However, there are no ionized impurities. Th is preserves charge carrier scattering to the intrinsic semiconductor level and increases carrier mobility with respect to the conventionally doped layer. We fabricated Si nano-grating layers and measured their electrical characteristics to monitor geometry induced doping (G-doping). Grating was fabricated using laser interference lithography (375 nm laser) followed by reactive ion etching of Si. Next, large square island (0.3 x 0.3 mm) was shaped in the device layer and four SiTiAg ohmic contacts were formed to measure electrical characteristics. Th e I-V characteristics were recorded using both 4 wire and 2 wire methods. Resistancetemperatureure Þ(T) dependences (T = 300 K) were recorded as well. For all 12 samples, nano-grating layers showed 2-3 order of magnitude reduction in resistivity. Resistivity anisotropy was in the range 0.2-1 at 300 K. Obtained geometry induced doping level corresponds to “eff ective impurity” concentration of 3x1018 cm-3. Th e agreement with G-doping theory, Þ(T) dependence, is that it was observed (data from 12 samples) that nano-grating reduces resistivity of Si layer from 10 Ohm cm (plain layer) to 5x10-2- 8x10-3 Ohm cm. Th is reduction is in agreement with theoretical prediction of G-doping. Value 10-2 Ohm cm corresponds to “impurity” concentration of 3x1018 cm-3 (Phosphorous in Si). G-doping does not requires ionized impurities. Th is allows high carrier mobility and temperature independent carrier concentration. Nano-grating fabrication does not require sophisticated technology and can be used for solar cells and other photovoltaic devices, ultra high frequency electronics and power electronics.
Subjects
NanotechnologyAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract
Nano hybrid of Phosphorous doped single layer graphene with Ni0.5Zn0.5Fe2O4 nano particles: green synthesis , characterization and microwave dielectric spectroscopy
Conference abstract · 2018
Evaluation of osteoblast-like cell response to hydroxyapatite nano-particles deposited on selfformed Tio2 thin layer on ti surface
Research article · 30 Mar 2021
Multiple Doping (Ag+Fe+La) Induced Altering of the Magnetic and Antibacterial Properties of Zno Nano Powders
Conference abstract · Jun 2020
Chemical bath deposition of bivo4 thin films on fluorine doped tin oxide substrate for efficient solar water splitting
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- SubjectNanotechnology
- BylineArticles whose byline prints “M Mebonia”
