Research article · Feb 2015
Research articlePublished 27 Jun 2016
Adaptive Filter Implementation for Dstatcom
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Non sinusoidal current in a distribution system is mainly due to nonlinear characteristics of equipment such as adjustable speed drives, switch-mode power supplies, rectifiers, and others such type of loads. In most cases, nonlinear loads are represented either as a harmonic current source or a harmonic voltage source in practical applications and responsible for creating power-quality problems. Mitigation of power-quality problems can be achieved by using passive or active filters; however, due to certain advantages of active filter (AF) with digital control, it is used for improving power quality. An improved version of a shunt-connected AF used in the distribution system is known as a distribution static compensator (DSTATCOM). It is used for compensation of current-related power-quality problems such as reactive-power compensation, harmonics elimination, and load balancing in power factor correction (PFC) mode and zero voltage regulation (ZVR) mode. Improved responses and capacity for transient overload even at a reduced voltage level are the major advantages of DSTATCOM. Various international standards such as IEEE and IEC have reported the guidelines of harmonics limit at the point of common coupling (PCC). Effective utilization of a converter used as a DSTATCOM depends upon the control algorithm used for extraction of reference currents and switching schemes. For extracting reference signals, many time-domain control algorithms are available, which are based on phase-dictated sinusoid-tracking parameter extraction of non-stationary sinusoidal, amplitude phase-locked loop (PLL), etc; unit template-based control algorithm without sensing load currents; one-cycle control, which has excellent harmonics suppression, simple circuitry, robust performance, and low cost linear feedback control and signal-processing algorithm for selective harmonic identification based on heterodyning, moving-average finite-impulse response filters, and PLL using feed forward based control. These algorithms are based on basic arithmetic operation of mathematical function, transform, tuning of internal constants, clock, an integrator, flip-flops, comparators and logic circuits, etc. The performance of these classical control algorithms depends upon selection and tuning of internal parameters, circuit components, and their formulations. An AF is implemented in three-phase distorted voltage ac mains for reactive-power compensation, harmonics elimination, and load balancing with a self-supporting dc link in PFC and ZVR modes of DSTATCOM. This proposed control algorithm is also modified for DSTATCOM operation in ZVR mode. The main features of this control approach are high convergence speed and robustness with respect to input frequency and internal parameter variations and less sensitivity to voltage pollutions when it is used as a reactive-power component of current extraction. Design of control algorithm only needs multiplications, integral, gain, and subtraction blocks. Thus, the structure of this control algorithm is based on basic arithmetic operation; hence, its implementation is simple, and it does not require any extra synchronization circuit. Selected values of integral constants are not affecting the performance of the filter within a certain range. The simulations were performed in the environment of MATLAB/SIMULINK.
Subjects
EngineeringAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Research article · Apr 2014
Design and Implementation of High Performance Adaptive FIR Filter Systems Using QRD-RLS Method
Research article · Dec 2014
DSTATCOM Implemented On a 3 Phase 4 Wire Distribution System for Harmonic Elimination and System Balance
Research article · Feb 2014
Design and Implementation of Dstatcom Topology with Three Phase Multi Level Inverter for Load Compensation with Nonstiff Source
Research article · 16 Mar 2019
The Reticular Atomic Filter in the Vacuum: The Adaptability of the Electronic Cloud of Atoms that Make Up a Solid with Two Applications-Hydrogen and Pure Water
More from this journal
The newest in International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering.
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalInternational Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering
- SubjectEngineering
- BylineArticles whose byline prints “N.Narasimhulu”
- BylineArticles whose byline prints “K.Swathi”
