Scholars Central

Research articlePublished 11 Jan 2016

MULTI-OBJECTIVE OPTIMIZATION OF MACHINING PARAMETERS USING GREY TAGUCHI METHOD

Authors: Amar Nath, S.P.Shrivas, A K Khandelwal

Journal of Harmonized Research in Engineering

Volume 4 · Issue 1 · Pages 1–5

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

In this research, a distinct combination of Taguchi method, Gray Relational Analysis (GRA) with an experimental investigation was conducted to determine the main machining parameters which contribute to material removal rate (MRR) and surface roughness (SR) in wire-EDM of mild steel. In WEDM operations, Proper selection of process parameters is essential to obtain good surface finish and higher MRR. In setting the machining parameters, particularly in rough cutting operation, the goal is - the maximization of MRR, minimization of SR or increasing the quality. In this experiment using the selected control parameters are discharge current, pulse on time, pulse off time and servo feed setting. The four control parameters each are three level means L27 orthogonal array based on Taguchi design is selected for this analysis. The relatively significant parameters were determined by Analysis of Variance (ANOVA). The variation of output responses with process parameters were mathematically modeled by using non-linear regression analysis. The models were checked for their adequacy.The optimal parameter setting for maximum MRR and minimum SR was obtained by Gray Relational analysis. Keywords: Material removal rate (MRR), Surface roughness (SR), ANOVA, Taguchi Design, Grey Relation Analysis (GRA).

Subjects

Engineering

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Similar by topic

More from this journal

The newest in Journal of Harmonized Research in Engineering.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Harmonized Research in Engineering
  • SubjectEngineering
  • BylineArticles whose byline prints “Amar Nath”
  • BylineArticles whose byline prints “S.P.Shrivas”
  • BylineArticles whose byline prints “A K Khandelwal”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels