Scholars Central

Conference abstractPublished 2020

Process Systems Engineering for sustainable Polyhydroxybutyrate (PHB) production

Authors: Soshu Kirihara

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

In stereolithographic additive manufacturing (STL-AM) processes, 2-D cross sections were created minutely through photo polymerization by ultraviolet (UV) laser drawing on spread resin paste including ceramic nanoparticles, and 3-D models were sterically printed by layer lamination as shown in Fig. 1 [1-3]. In this investigation, solid electrolyte dendrites of yttriastabilized zirconia (YSZ) with spatially ordered pores were processed for fuel cell miniaturization. Subsequently, ceramic sheets of lithium-lanthanum-titanate (LLT) with micro emboss patterns were developed for all-solid batteries. Designed models with intended 3-D structures were converted into the stereolithography (STL) file format through polyhedral approximations and sliced into a series of 2-D layers. The slicing pitches were defined as 50 μm for laser scanning stereolithography. The numerical data were transferred into each stereo-lithographic system to create raster patterns for laser scanning. The lithographic system has been developed to obtain bulky ceramic components with functional geometries. An automatic collimeter was newly equipped with the laser scanner to adjust beam diameter. Fine or coarse beams could realize high resolution or wide area drawings, respectively. As the row material of the 3-D printing, nanometer sized ceramic particles were dispersed in to acrylic liquid resins at 50 % in volume fraction. These materials were mixed and deformed to obtained thixotropic slurry for 15 min at 700 and 300 rpm of rotation and revolution speeds, respectively. The resin paste was spread on a glass substrate at 100 μm in layer thickness by a mechanically moved knife edge. An ultraviolet laser beam of 355 nm in wavelength was adjusted at 50 μm in variable diameter and scanned on the spread resin surface. Irradiation power was increased at 1 W for resin dewaxing and powder sintering through heating by ultraviolet ray propagations, resonations and absorptions in the paste materials. These YSZ and LLT micro components were shown in Figs. 2 and 3. Part accuracies of green bodies could be measured and observed by using a digital optical microscope (DOM). The microstructures of the sintered components were observed using a scanning electron microscope (SEM). The relative densities of these ceramic components were measured by the Archimedean method.

Subjects

Chemistry

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Similar by topic

More from this journal

The newest in Insights in Analytical Electrochemistry.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalInsights in Analytical Electrochemistry
  • SubjectChemistry
  • BylineArticles whose byline prints “Soshu Kirihara”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels