Scholars Central

Conference abstractPublished 30 Aug 2017

Hydrothermal lignin liquefaction

Authors: Julia Schuler

Karlsruhe Institute of Technology, Germany

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Hence, the focus of the presented work is to get a better knowledge of lignin as a starting material to produce chemicals. Therefore, the different influences of temperature and reaction times, the reaction pathways and the therefore necessary analytics need to be understood. But lignin brings a lot of challenges with it. The first is, that every lignin has a different composition, depending on the wood source and the degradation method applied to gain the lignin which has a significant influence on the lignin structure. And with this, a lot of changes come e.g. in the handling of the biomass. To liquefy lignin towards high functional molecules, hydrothermal conditions are used. To understand the challenges (reaction pathways, analytic, and so on) of lignin better it is important to have a look at different lignins and lignin sources, so to see if the behavior of lignin under several conditions are the same, and to see if with every lignin the same challenges are coming. Therefore, different lignins were used, e.g. bark or a kraft lignin. It is also considered that already degraded lignin products molecules repolymerise to oligomers, and so the yield of monomeric phenolic compounds decreases. To have an influence on this, different experiments are run. Fresh medium and feed get in contact with solutions directly after the hydrothermal liquefaction. The repolymersation shall be influenced and stopped through this and the yields of e.g. catechol shall get higher. Also this shall lead to a process for different biomasses, to gain platform chemicals. Recent Publications D. Forchheim, U. Hornung, A. Kruse, and T. Sutter, “Kinetic Modelling of Hydrothermal Lignin Depolymerisation,” Waste and Biomass Valorization, no. February, pp. 1–10, 2014. A. Kruse and N. Dahmen, “Water - A magic solvent for biomass conversion,” J. Supercrit. Fluids, vol. 96, pp. 36–45, 2015. P. Schulze, A. Seidel-Morgenstern, H. Lorenz, M. Leschinsky, and G. Unkelbach, “Advanced process for precipitation of lignin from ethanol organosolv spent liquors,” Bioresour. Technol., vol. 199, pp. 128–134, 2016 T. Faravelli, A. Frassoldati, G. Migliavacca, and E. Ranzi, “Detailed kinetic modeling of the thermal degradation of lignins,” Biomass and Bioenergy, vol. 34, no. 3, pp. 290–301, 2010 D. Forchheim, A. Kruse, “Optimization of the reaction parameters of a CSTR and a PFR ( Batch ) for the recovery of phenol from hydrothermal biomass liquefaction.”

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Similar by topic

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • BylineArticles whose byline prints “Julia Schuler”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels