Short communication · 19 Aug 2026
Conference abstractPublished 2018
PCL based toughness modifiers for biophotopolymers
Vienna University of Technology, Austria Karl Leibinger Medizintechnik GmbH & Co. KG, Germany
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
In the last decade, lithography-based additive manufacturing (L- AMT) particularly digital light processing (DLP) based stereolithography has become a valuable tool for the fabrication of patient specific (bone)implants of including 3D microstructures.1 However, a main issue of common photopolymers i.e. (meth)acrylates are the high cytotoxicity and low biocompatibility, especially if applied as biodegradable implant. Moreover, due to brittle mechanical properties, an appropriate use as bone substitution material for oral or maxillofacial traumata is hardly possible. In this work, we present an optimized vinyl ester based biophotopolymer with low cytotoxicity, good biocompatibility and enhanced mechanical properties. The base formulation containing divinyl adipate, (DVA) was modified with thiol-ene chemistry (trimethylpropane tri(3-mercaptopropionate) (TMPMP))2, along with high molecular weight additives, poly(caprolactone) (PCL), divinyl carbonate (DVC) and urethane dithiol (UDT), both based on poly(caprolactone) (PCL), to improve curing reactivity and toughness, respectively. These formulations were characterized by realtime-near infrared- photorheology (RT- NIR-photorheology) to investigate curing- and material parameters (i.e. reactivity, double bond conversion and shrinkage stress)3. Furthermore, the mechanical properties were tested via tensile test, dynamic mechanical thermal analysis (DMTA), and dynstat impact resistance test. Finally, it was possible to print 3D test structures to prove the applicability as a possible bone substitution material in future.
Subjects
Materials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Biomaterials and Medical Applications.
Research article · 9 Feb 2025
Comparison of Stability on Screw Placement with or without Polymethyl Methacrylate Filling in Porcine Mandible
Research article · 25 Jan 2024
Recent Advances of Chitosan and Natural Polymer-based Hydrogels and their Potential Applications in Wound Healing
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalBiomaterials and Medical Applications
- SubjectMaterials Science
- BylineArticles whose byline prints “C Hofstetter”
- BylineArticles whose byline prints “S Orman”
- BylineArticles whose byline prints “F Reinauer”
- BylineArticles whose byline prints “A Aksu”
- BylineArticles whose byline prints “R Liska”
- BylineArticles whose byline prints “S Baudis”
- BylineArticles whose byline prints “J Stampfl”

