Scholars Central

Conference abstractPublished 25 Aug 2015

Ethylic biodiesel: the bottlenecks for process optimization

Authors: Antonio Meirelles

University of Campinas, Brazil

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Biodiesel is mainly produced using the methylic route. Ethanol has the advantage of being a renewable alcohol, but the ethylic route has drawbacks that must be overcome for process optimization. Ethanol enhances the mutual solubility of the hydrophilic and lipophilic substances that occur along the production process and makes more problematic the purification steps. Along the reaction path two liquid phases are formed, the upper one is rich in monoalkyl esters and the bottom one contains glycerol. The industrial process uses basic homogeneous catalysts and requires a sequence of purification steps. The use of alternative approaches, such as biocatalysis, heterogeneous catalysis or supercritical conditions, also generates a two-phase reaction system and requires the use of alcohol in excess due to the reaction´s reversible character. This means that phase splitting and alcohol recovery are steps required for purifying biodiesel as well as for recycling the reactant in excess. In case of bioethanol as reactant, the sequence of purification steps used in the methylic route is not the best option. For instance, the ethylic route pontentially requires a specific and complete dehydration unity for recovering bioethanol, increasing the production costs of biodiesel. A new approach must be developed for the ethylic route, based, for instance, on the concept of using bioethanol in the whole sequence of the biofuel production, from the seed to the tank. This approach involves the following main steps: extraction and deacidification of vegetable oils using bioethanol as solvent, reactive steps applied to both ethylic miscelas containing deacidified oil or free fatty acids, biodiesel purification steps with minimal addition of washing water and a recovery and dehydration step of the bioethanol by extractive distillation using glycerol as dehydrating agent. The bioethanol used as reactant can also be acquired in hydrated form (azeotropic mixture) and be dehydrated within the proposed process. The main bottlenecks of the production process were addressed and process optimization performed. Different sources of fatty compounds were considered, including the most important for the Brazilian case, such as soy and palm oils, as well as other sources of potential relevance for the future, as microalgae oil. Experimental runs and modeling approaches were conducted with the aim of measuring and prediciting the relevant phase equilibrium data and for evaluating the performance of equipments for oil extraction and for oil deacidification by liquid-liquid extraction or ion exchange. The sequence of ethylic biodiesel production was investigated using ASPEN PLUS, including the bioethanol recovery and dehydration step. Some aspects related to the integration of food, feed, bioproducts and biodiesel production were considered, for instance the quality of the deffated meal after oil extraction with bioethanol and the recovery of minor components (tocopherols, sterols, etc.) during oil deacidification and the biofuel production.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels