Conference abstract
Conference abstractPublished 21 Sep 2015
Recent developments in mercury removal technologies in gas processsing
The Petroleum Institute, UAE
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Presence of mercury in the natural gas and crude oil is of serious environmental, health and processing concern to gas processing as well as refining industries. The concentration of mercury in the gas could vary from nano to micro grams depending on the location on the gas wells. Mercury could be present in elemental, organic or inorganic forms, all which are of serious concern as it would seriously enhance the corrossion rate of the aluminium exchangers leading to catastropic failiure. Hence mercury removal is one of the separation processess in gas and crude processing involving differnt kinds of adsorbents. These separation process are normally coupled with moisture removal operations of the gas processing utilizing carbon based adsorbents either with regeneral type utilizing silver impregnated carbons or non regenerable type involving sulfur, iodide, bromide etc. The most popular and cheaper being the sulfur loaded carbons, however the performance and the cost of which is found to vary in orders of magnitude depending upon its performance. A relative comparison of the various the forms of popularly avaialble and laboratory developed carbons indicate the importance of efficient incorporation of the sulfur in the carbon matrix rather than the high amounts of sulfur being loaded. Even the best of materials available have utilized far less amouts of sulfur for binding with mercury as compared to the amount of sulfur present in the material. The recent developments include sulfonated carbons with relatively much higher mercury removal capacity although they had relatively low surface area and sulfur content as compared with the popularly utilized UOP catalyst in the industry. The second generation development with better performance is reported with metal sulfide impregated carbon material which overcome some of the disadvantages of sulfur impregnated carbons. The recent focus on these lines of development concentrate on utilization of ionic and deep utectic solvents in carbon matrix with compatively better performances.
Ask about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 2018
COLLOIDAL GAS APHRON (CGA): A NEW TECHNOLOGY TO REMOVE TOTAL CONTAMINANTS INCLUDING OIL FROM PRODUCED WATER USING FROTH FLOTATION
Conference abstract · 7 Oct 2013
Mid-infrared semiconductor laser based trace gas sensor technologies: Recent advances and applications
Article · 29 Jul 2024
Gas Hydrates: Recent Development and Commercial Approaches
Mini review · 19 Sep 2022
Recent Development of Two-Dimensional Gas Chromatography Mass Spectrometry and its Application
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- BylineArticles whose byline prints “Chandrasekar Srinivasakannan”
