Scholars Central

Conference abstractPublished 14 Sep 2015

TiO2 mineral from Ilmenite : Development of extraction method and its characterization

Authors: Muhammad Nurdin

Universitas Halu Oleo, Indonesia

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Study on mineral characterization and TiO2 extraction by leaching method using H2SO4 on iron sand of Tapunggaya–Southeast Sulawesi has been conducted. Results of initial testing using X-Ray Diffraction (XRD) and X-Ray Flouresence (XRF) on sample of Tapunggaya iron sand showed that there were 4 major compounds namely Fe2O3, TiO2, MgO, and SiO2 in the mineral. TiO2 extraction was conducted using sulphate method, by reacting milled iron sand with sulfuric acid at high temperatures (>110°C) for ± 30 minutes. Titanium extract was then heated at a temperature of 90°C to precipitate TiO2. The precipitate was obtained by centrifugation at 10,000 rpm for 10 minutes to solidify the precipitate and separate from the liquid phase of H2O and the remaining sulfuric acid. Subsequently, the extract was calcined for ±7 hours at temperature of 500oC and 1000oC to obtain TiO2 anatase and rutile then purified with HCl and HNO3. XRD and XRF characterization results showed the obtained TiO2 extract containing anatase of 8.97% (70.3°; 1.337 Å) and rutile of 19.78% (54.2°; 1.699 Å).

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • SubjectGeology and Earth Science
  • BylineArticles whose byline prints “Muhammad Nurdin”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels