Scholars Central

Conference abstractPublished 14 Sep 2015

Optimization of process parameters for the Al6061-red mud particulate composites using Taguchi method

Authors: Reddappa H N

Bangalore Institute of Technology, India

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

The present investigation has been done to study the effect of different input process parameters on Al606-Red mud composites, namely particle size, wt. % of Red mud particles and stirring speed on the hardness, impact strength and tensile strength. Three parameter i.e. particle sizes of Red mud (50, 75 and 100 micron), wt. % of reinforcement (5%, 10% and 15%), stirring speed (100, 200, 300 rpm) was used to fabricate different samples of composites by using liquid metallurgy route (stir casting technique). Each parameter has three different levels. L9 orthogonal array table used to made different specimen. The effect of these input process parameters on the output response has been analyzed using analysis of variance (ANOVA). The contribution of each process parameters on the hardness, impact strength and tensile strength was analyzed by using ANOVA. The results have shown that the particle size of Red mud particles, the wt. % of Red mud and stirring speed have a significant effect on the hardness, impact strength and tensile strength.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Similar by topic

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • SubjectMaterials Science
  • BylineArticles whose byline prints “Reddappa H N”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels