Scholars Central

Conference abstractPublished 30 Jul 2017

The random fiber lasers and their applications

Authors: Xiaoyi Bao

University of Ottawa, Canada

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Random fiber lasers (RFLs) with unique frequency and phase properties have attracted much attention. Comparing with the fixed cavity length lasers, RFLs rely on a scattering medium, where multiple scattering lights due to spatial inhomogeneity is captured by the fiber waveguide and amplified through different gain media leading to one-dimensional lasers with good directionality. The frequency, phase and intensity noises of RFLs have strong dependency on the free mean length (Δl) of the scattering medium. Through our experiments, we observed three different cases relative to the fiber length L, wavelength λ: (1) when Δl>λ, the frequency jitter is the highest, although relative intensity noises (RIN) and the linewidth (<5 kHz) is comparable to the phase locked laser. The random feedback can be realized by writing random grating at sub-mm spacing; (2) when Δl~λ; the linewidth can be <100 Hz with long fiber (L≥5 km), RIN is increased due to large number of the random modes, while the frequency noise is reduced; (3) Δl<λ, the RIN and frequency noise are the lowest, and the linewidth is ~10 Hz, which can be used as reference for laser linewidth characterization. The gains of the RFLs are: Er-doped fiber (EDF), Brillouin and Raman amplification and SOA. The high RIN in RFLs can be used for the random number generators (RNGs) at high speed (MHz to GHz). The distributed feedback allows multiple wavelengths operation in the laser without phase matching condition of 2 πm (m is integer) constraint in the wavelength selection, and hence it can be used as tunable microwave generator. For the Brillouin scattering, the random mode injection acts as the mode selection element, which allows single mode operation and high order Brillouin frequencies with the high contrast and narrow linewidth (1 kHz). The random gratings can be used as random feedback and sensing head to achieve high sensitivity thanks to the lasing gain for large dynamic range. The temperature, strain and refractive index and ultrasound sensing has been demonstrated.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • SubjectPhysics & Astronomy
  • BylineArticles whose byline prints “Xiaoyi Bao”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels