Review article · 21 Sep 2016
Conference abstractPublished 27 Aug 2018
Microstructural design in hydrogen fuel generation and storage
Tier I Canada Research Chair & Professor at University of Saskatchewan, Canada
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Hydrogen has been recognized as a clean and sustainable fuel. However, still many problems have to be to be solved in the area of generation, transport, and storage of this fuel for the future hydrogen-based economy to be realized. The reaction of water with activated aluminum powder is considered as one of the methods to generate hydrogen. The reaction produces also aluminum hydroxide (Al(OH) 3 or AlOOH) as the byproduct; these compounds change to alumina (Al2O3) after calcination process, and alumina can produce aluminum. Hydrogen production rate can be increased if an effective surface area of aluminum exposed to oxidation is increased. Ball milling process is considered as a method that remarkably changes the microstructure of morphology of aluminum hydroxides and can produce submicron or nano-sized particles. We found that microstructural refinement can be used to promote the reaction and allow increasing the production of hydrogen. The addition of water-soluble salts (potash or salt) also allows increasing the oxidation rate and hydrogen generation. However, we discovered that the presence of salt had much smaller influence than microstructural modifications. The traditional shrinking core model was modified to explain the kinetics of the reaction between aluminum particles and the fluid. The storage of hydrogen will also require structural modification of the storage system. One a storage system that was developed by us will be discussed. We designed a Pd-graphene composite for hydrogen storage with spherical shaped nanoparticles of 45 nm size homogeneously distributed over a graphene substrate. This new hydrogen storage system has attractive features like high gravimetric density, ambient conditions of hydrogen charge and low temperature of the hydrogen discharge. The palladium particles produce a low activation energy barrier to dissociate hydrogen molecules These Pd particles, have to be nano-size and homogeneously dispersed on the graphene surface, to serve as efficient hydrogen receptors and further facilitate a dissociation and diffusion of hydrogen and storage in graphene via a spillover process. The hydrogen storage capacity in such a combined metal-graphene system could be significantly increased compared to storage in graphene or in metal. In this project, we optimized the structure of Pd/graphene to allows a hydrogen uptake at ambient conditions and discharging of hydrogen at low temperature. Detailed analysis of the mechanism of hydrogen storage using ab-into calculation for graphene metal system is presented.
Subjects
Energy & PowerAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 27 Jul 2017
Development of a pure oxygen and pure hydrogen fuel cell generator for small under water vehicles
Conference abstract · 29 Aug 2018
Hydrogen generation in metal water reaction and strategies of storage
Conference abstract · 10 Sep 2019
Solar PV/T integrated reversible solid oxide fuel cell system for power generation and storage
Short communication · 25 Jun 2021
The Design and Simulation Studies of Hybrid Power Generation Systems Based on Wind, Photovoltaic, Electrolyzer, and PEM Fuel Cells
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- SubjectEnergy & Power
- BylineArticles whose byline prints “Jerzy A Szpunar”
