Scholars Central

Conference abstractPublished 3 Oct 2016

Micro-topography generation method using a rotating tool actuated by an electromagnetic actuator

Authors: Sun-Kyu Lee

Gwangju Institute of Science and Technology, Korea

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

This paper presents a micro-patterning or surface texturing technique on the fixed work surface using a proposed new spindle system with a rotating cutting tool controlled by the electromagnetic actuator in real time. The proposed spindle system creates micro-sized patterns using rotating tools such as a micro-milling tool and a micro-grinding wheel. The shaft of the spindle is suspended by air bearings, and an electromagnetic actuator controls the radial motion of the spindle housing instead of the shaft. A PID controller is adopted to make the system stable, and adaptive feedforward cancellation is used to effectively compensate for the run-out of the spindle system during machining. The micro pattern array and the digital images are generated on the electro-less Ni coated workpiece using a single-flute diamond square end mill. The machining results show that the run-out compensation improves the machining accuracy. It is expected that micro-patterning using the proposed spindle system can be applied over a large surface area which is fixed at the work table.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Similar by topic

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • BylineArticles whose byline prints “Sun-Kyu Lee”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels