Scholars Central

Conference abstractPublished 1 Sep 2015

Mid-infrared InSb quantum dot laser diodes

Authors: Anthony Krier

Lancaster University, UK

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

The mid-infrared spectral range is technologically important for a variety of applications including gas sensing, optical spectroscopy, bio-medical diagnostics etc. Although type II InSb/InAs QDs have shown electroluminescence up to room temperature and are a promising candidate for diode lasers at wavelengths longer than 3 µm , there have been only a few reports of InSb QD lasers. In this work, we demonstrate coherent emission from InSb QDs at wavelengths between 3.02 µm and 3.11 µm at temperature, Tmax up to 120 K using pulsed excitation, with a threshold current density, Jth~1.6 kA cm-2 at 4 K. The gain and spectral tuning behaviour were also investigated. We developed a hybrid laser structure containing ten sheets of sub-monolayer InSb QDs in an InAs waveguide sandwiched between a p-InAs0.61Sb0.13P0.26 lower cladding layer grown by liquid phase epitaxy and an n+ -InAs plasmonic upper cladding layer grown by MBE. Fig. 1 shows the laser peak blue shifts with increasing temperature when T<50 K. For T>50 K, the peak moves to longer wavelength as temperature increases. The modal gain of the laser was extracted from lasers with different cavity lengths resulting in a value of 29 cm-1, (or 2.9 cm-1 per InSb QD layer), which is close to that found in type II QW lasers emitting at similar wavelengths. The material gain was estimated to be 19 x104 cm-1, which is similar to that for type I QDs.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Similar by topic

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • SubjectPhysics & Astronomy
  • SubjectNanotechnology
  • BylineArticles whose byline prints “Anthony Krier”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels