Scholars Central

Conference abstractPublished 10 Aug 2015

Compatibilization of microfibrillated cellulose for bio-based nano-composites through functionalized interface engineering

Authors: Peter Samyn

Freiburg University, Germany

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

The abundant availability of cellulose resources and the favourable mechanical properties of its microfibrillated compounds makes them as good candidate for reinforcing agents in biocomposites. However, problems in homogeneous dispersive and distributive mixing of the cellulose additives due to their highly hydrophilic nature, often restrict the full capability of bio-based composites. Traditionally, surface modification of microfibrillated cellulose is often performed by introducing chemical moieties such as silanes, acrylates, vinyl etc. In view of developing a more sustainable and functional design of interface engineering, a new method is presented where nanoparticles including plant oil or wax are deposited onto the fiber surface and the required hydrophobicity can be controlled by thermal release of the hydrophobic moieties from the surface under thermal curing. In this work, the surfaces of microfibrillated cellulose are modified through decoration with poly(styrene-co-maleimide) nanoparticles that are synthesized in presence of with carnauba wax and soy oil. The fibers are added in an autoclave reactor together with the poly(styrene-co-maleic anhydride) precursors and ammonium hydroxide. During reaction, further fibrillation of the fibers together with the deposition of 20 – 100 nm nanoparticles onto the fiber surfaces are observed. Finally, a hydrophobic fibrous network is obtained with encapsulated hydrophobic agents. After thermal curing of the modified pulp fibers at temperatures of 125 to 250°C for different times, the gradual release of wax from the network is observed and final contact angles of 157° on the microfibrillated cellulose are measured. The modified fibers are characterized by thermal analysis (DSC, TGA, DMA) and chemical mapping by confocal Raman spectroscopy. The processing properties of the modified fibers are characterized by rotational rheometry. Finally, the beneficial properties of the modified fibers during melt-processing together with PLA result in an increase in mechanical properties for the composites with surface-modified fibers compared to the native fibers.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • SubjectEngineering
  • SubjectMaterials Science
  • SubjectNanotechnology
  • BylineArticles whose byline prints “Peter Samyn”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels