Conference abstract
Conference abstractPublished 11 Aug 2015
Printed nanomaterials-based flexible device sheet
Osaka Prefecture University, Japan
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Flexible electronics is of great interest in the next class of devices for wearable, human-interactive, and prosthesis/robotic applications. In fact, many efforts for the flexible devices using organic and/or inorganic materials have been conducted by developing fabrication methods and flexible materials. The important requirements to realize practical flexible and wearable devices are (1) high performance, (2) low-cost, (3) low power consumption, (4) system integration, and (5) comfortability. Our research focuses on the achievement of above requirements using a printing method of inorganic nanomaterials onto a flexible substrate. In this talk, mainly printed sensor and logic circuitry on a flexible substrate are discussed. For printed sensors, strain, temperature, and ultraviolet light sensors are introduced for the applications of wearable health monitoring and robotic devices. For a logic circuitry, complementary metal oxide semiconductor (CMOS) circuitry is demonstrated with relatively high voltage gain and mobility. However, it should be noted that the flexible CMOS circuitry was fabricated by using a standard semiconductor infrastructures because the technique to obtain fine patterning and high quality of metal, semiconductor, and insulator materials via printing methods is limited. Finally, some proof-of-concept devices based on these inorganic-based flexible devices are introduced.
Subjects
NanotechnologyAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 2019
Intelligent aerospace composites with integrated nanomaterials-based sensing
Conference abstract · 17 Nov 2016
Recent progress in the development of nanomaterials-based sensors for applications in SF6 insulated equipment monitoring
Review article · 12 Mar 2013
Nanomaterials-Based Health Care and Bioanalytical Applications: Trend and Prospects
Conference abstract
Current trends and challenges of fabrication techniques, sensing modes and applications of nanomaterials-based biosensors
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- SubjectNanotechnology
- BylineArticles whose byline prints “Kuniharu Takei”
