Scholars Central

Conference abstractPublished 6 Dec 2017

Intermediate temperature synthesis and SOFC anode application of cerium silicatebased oxy-apatites

Authors: Sunghwan Lee

Baylor University, USA

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Oxy-apatites based on rare earth silicates (A10x(SiO4)6O2±x, A=rare earth cation) are of increasing interest for solid oxide fuel cell (SOFC) application due to the high conductivity at moderate temperatures (<1000 K). Here, we report on the intermediate-temperature synthesis (973 K) of thin film oxy-apatites and high total conductivity of the cerium silicate-based apatites at temperatures <750 K: the Ce4.67 (SiO4)3O-based apatites (~80 nm-thick) were synthesized at 973 K at very low oxygen partial pressure (p(O2)<10-17 atm) and the incorporation of ZnO into the cerium silicate system leads to the high total conductivity of ~0.05-0.2 S/cm. The formation of oxy-apatites was identified by in-situ conductivity measurements as a function of p(O2), x-ray diff raction analysis and x-ray photoelectron spectroscopy. In particular, the in-situ conductivity measurements confi rm that the dominant conduction mechanisms of this class of materials are mainly dependent on oxygen interstitials. Since these materials are prepared at low p(O2) and are stable in reducing atmospheres, Ce4.67(SiO4)3O-based thin film apatites exhibiting high conductivity are of relevance as anodes for intermediate temperature thin film SOFC application. In order to evaluate the performance of the apatite anode in SOFC devices, thin film apatites were grown on Sc-stabilized ZrO2/LSCF electrolyte/cathode substrates. Bilayer anode of apatite/Pt and Ni- apatite composite anode were also utilized in the identical electrolyte/cathode system and the performance were compared. The noteworthy SOFC performance (e.g., peak power density of ~100 mW/cm2 at 748K) and superior stability were observed in Ni-apatite SOFCs due to higher catalytic activity and low contact resistance at the electrolyte/anode interface compared to those with a single layer apatite anode and bilayers of apatite/Pt anode. Th e present study demonstrating intermediate temperature synthesis of Ce4.67 (SiO4)3O-based oxy-apatites and their high conductivity may signifi cantly contribute to the field of intermediate temperature thin fi lm SOFC applications.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • BylineArticles whose byline prints “Sunghwan Lee”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels