Research article · 2018
EditorialPublished 6 Mar 2021
Flow around Surface-Mounted Permeable Cubes on Solid Surfaces
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
A wind tunnel experiment was administered to characterize the flow surrounding rectangular prisms of varying permeability, each set mounted on a stationary plane-bed surface and subsequently on an erodible bed. Laser-Doppler anemometer measurements of the horizontal and vertical velocity components were obtained during a grid that included a neighbourhood adjacent to the windward face, enveloped the free end of the shape, and extended ≈6.5 element heights downwind of the rear wall. From these component measurements, the entire velocity (Tuw), turbulence intensity (TI), Reynold Stress (RS) and therefore the turbulence K.E. (TKE) were calculated throughout the sampling array. As compared to an impermeable same-sized cube, the near-surface TKE and RS were substantially reduced within the wake flow behind the permeable elements. Within the plane-bed experiments, TI generally increased downwind of the permeable cubes, opposite to the trend for the impermeable form. The excellence in TI was less pronounced, however, when the bed morphology developed scour marks. The impermeable cube had the most important amount of abrasion relative to its volume, in response to strong downwash along its windward face and therefore the development of an active horseshoe vortex. This coherent flow structure wasn't detected for all permeable forms and therefore the amount of scour was orders of magnitude less. This study would suggest that for restricting erosion, the efficiency of a surface-mounted element are often improved by making the walls of the shape permeable instead of solid, thereby increasing energy dissipation within the wake flow while reducing vortex impingement and bed shear stress. The study of the flow around surface-mounted, sharp-edged obstacles placed in a channel is fundamental to the understanding of the flow mechanisms for complex two- and three dimensional geometries. There exists a considerable amount of published data for flows over two-dimensional geometries such as ribs and fences. However, there are markedly fewer studies in the literature concerned with the flow around three dimensional obstacles. Of these, most are limited to the study of a single parameter, for example, the reattachment length. It is therefore the aim of this study to provide a general description of the flow around three-dimensional obstacles. Based on the flow visualization experiments performed for obstacles of different aspect ratio (width-to-height), the changes in the flow patterns as a function of aspect ratio are discussed qualitatively. Additionally, large-scale parameters such as the reattachment and separation lengths are discussed quantitatively. The flow around single, surface-mounted, prismatic obstacles submerged in a boundary layer at high Reynolds numbers depends on a large number of parameters.
Keywords
Ask about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Commentary · 23 Dec 2021
Multilayer Chip Inductor in the latent Surface Mounting Gadgets
Research article · 19 Feb 2018
Solder joints in surface mounted IC assemblies: Relief in stress and warpage owing to the application of elevated stand-off heights
Conference abstract · 17 Sep 2018
Effect of membrane permeability of Agrobacterium tumifaciens on curdlan biosynthesis and optimization of process parameters by response surface methodology
Conference abstract · 2017
Gas-permeable scleral contact lens OCT designed-20% autologus serum as therapy for visual rehabilitation and management of chronic ocular surface disease attributable to TEN and SJS.
More from this journal
The newest in Fluid Mechanics: Open Access.
Article · 30 Jun 2026
Exploring a Unified Biophysical Architecture of Regeneration: DNA Repair, Cellular Communication, and Scalar Waves
Brief report · 30 Dec 2025
Wind Turbine Blade Aerodynamics: Efficiency and Reliability Advancements
Brief report · 30 Dec 2025
Optimizing Fluid Flow for Enhanced Heat Exchanger Performance
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalFluid Mechanics: Open Access
- BylineArticles whose byline prints “Hermione”

