Scholars Central

Research articlePublished Feb 2015

Optimization of Diesel Particulate Filter Using Composite Geometry by CFD Analysis

Authors: Vijayaraj.J, Dr. Swaminathan. M R

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Existing research data suggests a variation in the soot thickness along the wall-flow filters of the DPF i.e. the soot cake thickness was uneven along the length(X-axis) of the channel. This project endeavors to explore the possibility of altering the geometry of the DPF filter and hence improve regeneration by achieving a normalised soot formation. A computational, three-dimensional approach to investigate the behavior of diesel soot particles in the micro-channels of a wall-flow, porous-ceramic particulate filter is presented. The flow field is simulated with a finite volume method. Darcy’s law was used to model the porous material. The permeability was obtained by fitting experimental data namely Inlet Velocity, Exit Pressure, mass flow rate and density At this stage the effort is focused on mainly reconstructing the soot formation on the walls of the filter. The pressure drop across the channel was taken a reference value for validating the CFD model. A commercial CFD Software FLUENT R15.0 is used to analyze the soot deposition process and results to be compared with that of conventional experimental data available

Subjects

Engineering

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Similar by topic

More from this journal

The newest in International Journal of Innovative Research in Science, Engineering and Technology.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalInternational Journal of Innovative Research in Science, Engineering and Technology
  • SubjectEngineering
  • BylineArticles whose byline prints “Vijayaraj.J”
  • BylineArticles whose byline prints “Dr. Swaminathan. M R”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels