Conference abstract · 30 Jun 2021
Conference abstractPublished 22 Jun 2020
Development of a Mg-Gd-Er-Zn-Zr alloy with ultrahigh strength and ductility via extrusion, pre-deformation and two-stage aging
Beijing University of Technology, China
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Due to the great potential for weight reduction in aerospace and automotive industries, magnesium-rare earth (Mg-RE) based alloys with outstanding mechanical performance have been widely investigated for decades. However, magnesium alloys are still restricted in engineering applications because of their lower strength and ductility, hence, there are large spaces and challenges in achieving high-performance Mg alloys. This work reports a Mg-Gd-Er-Zn-Zr alloy with ultrahigh strength and good ductility developed via hot extrusion, pre-deformation and two-stage aging. The extruded alloy comprises fine dynamically recrystallized (DRXed) grains and coarse worked grains with large aspect ratio. Pre-deformation has little effect on the microstructure and macro-texture, and serves primarily to introduce a large number of dislocations, resulting in strain hardening and higher precipitation strengthening during subsequent aging due to more nucleation sites. As a result, the alloy exhibits a yield strength (YS) of 506 MPa, an ultimate tensile strength (UTS) of 549 MPa and an elongation (EL) of 8.2% at room temperature, showing superior strength-ductility balance than the other wrought Mg-RE alloys previously reported. The current study proposes a combination of pre-deformation and two-stage aging to further improve the mechanical properties of wrought Mg alloys for engineering application.
Ask about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 12 Sep 2016
A high-entropy alloy with ultrahigh ductility breaks strength-ductility paradox
Conference abstract · 28 May 2018
Spark plasma semi-solid sintering: Bimodally grained high yield strength and ductility Ti-based alloys based on the eutectic transformation
Conference abstract · 20 Nov 2018
Effect of small/large alternative extrusion cycles and precipitates on the super high strength of A800 (Al-Zn-Mg-Cu) aluminium alloys
Research article · 24 Apr 2020
Two-stage anaerobic digestion of aerobic pre-treated sisal leaf decortications residues: hydrolases activities and biogas production profile.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- BylineArticles whose byline prints “Linyue Jia”
