Scholars Central

Research articlePublished 2021

Nanostructure Controlled Polymer-Ceramic Composites with Improved Interface

Authors: Douglas B. Chrisey

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Polymer ceramic nanocomposites with carefully designed interface structure can provide high energy density (~as high as 22 J/cm3) needed for the next generation of dielectric capacitors for large scale energy storage. We have prepared thiol-ene polymer matrix from a mixture of thiol and alkene monomers using large-scale method of photonic curing. Monomers of Pentaerythritoltetrakis (3-mercaptopropionate), 2,4,6 Triallyloxy-1,3,5- triazine and 1,3- Diisopropenylbenzene undergo click reactions and polymerize using a radical mediated process. When surface engineered barium titanate nanoparticles (~100 nm) are incorporated in the monomer mixture, these particles also click with the monomers to form a nanocomposite material. Barium titanate nanoparticles are surface engineered by using a three-step process: hydroxylation, silanization and monomer grafting. An alkene-ended silane (3-Acryloxypropyltrimethoxysilane) is used for silanization and thiol monomers are grafted from the alkene ends. The radicals during the preparation of nanocomposites are formed by activation of thiol monomers by intense pulses of light from a xenon flash lamp removing the requirement of photoinitiator in the final step. Also, the composition of materials in this work is designed to match the stoichiometric ratio of thiol and alkene functional ends. Covalent bond formed at the interface and improved dispersion resulting from the combined effect of silane and the grafted monomer results in nanocomposites with improved properties. The resulting nanocomposites show energy density as high as 22 J/cm3 even at a low nanoparticle loading while the dielectric loss is maintained below 0.2. Tailoring the interface structure at the nanometric level to obtain desired properties is a difficult task. It can be even more challenging when tailoring should be done in parallel while preparing nanocomposites in large scale using a cost effective method. The photonic curing process utilized in this work is a rapid, high-throughput and roll-to-roll amenable method. This study provides an easy route to an industrial scale method for the production of high energy density nanocomposites.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Similar by topic

More from this journal

The newest in Journal of Electrical Engineering and Electronic Technology.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Electrical Engineering and Electronic Technology
  • SubjectEngineering
  • SubjectEnergy & Power
  • BylineArticles whose byline prints “Douglas B. Chrisey”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels