Research article · 22 May 2015
Research articlePublished Jun 2014
Flow Visualization around Perforated Circular Finned Tubes by CFD
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Rate of heat transfer increases by several folds with the increase in the surface area of heat exchangers, in practice this is often achieved by having fins at the surface of heat exchangers. The objective of the present study was to visualize the air flow around perforated circular finned tube (PCFT) through computational fluid dynamics (CFD). The air-side flow was visualized through simulation in fluent. Visualization of flow of air around the tube and fin for various cases were studied. These cases include the different positions of perforations on fins with respect to stagnation point. The different positions selected for perforations with respect to stagnation point are no holes and holes at an angle of 90 degree, 100 degree, 110 degree, 115 degree, 120 degree, 140 degree, 145 degree, 150 degree, 160 degree, and 170 degree. Gambit was used for construction of geometry and k-epsilon model was used for flow visualization. The perforation at an angle of 120 degree with respect to stagnation point was found to be the best location because recirculation of flow at this location found to be least. However perforations at the angles greater than 90 degree but less than 170 degree were effective in reducing the recirculation
Subjects
EngineeringAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Research article · 22 Dec 2017
MELTING OF PCM BY ELLIPTICAL AND CIRCULAR FINS IN THE CYLINDRICAL THERMAL ENERGY STORAGE
Research article · 29 Apr 2017
Method of Weighted Residual Approach for Thermal Performance Evaluation of a Circular Pin fin: Galerkin Finite element Approach
Conference abstract · 19 Oct 2017
An Investigation of heat transfer performance of rectangular plate-fin heat exchanger by using common flow up & common flow down configurations of vortex generators with different wings attack angle
Conference abstract · 2 Oct 2017
Flow mechanism analysis of the Magnus effect for spinning finned projectile
More from this journal
The newest in International Journal of Innovative Research in Science, Engineering and Technology.
Review article · 2018
Tech-Care: Personal Health Monitoring and Prediction System
Research article · 2018
Spectrum Sensing Methods for Cognitive Radio: A Survey
Review article · 2018
Utilization of Food Wastes to Prepare Film Forming Biomolecules (Retracted)
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalInternational Journal of Innovative Research in Science, Engineering and Technology
- SubjectEngineering
- BylineArticles whose byline prints “Yogesh Pal”
- BylineArticles whose byline prints “Naushad Ahmad Ansari”
- BylineArticles whose byline prints “M. Zunaid”
