Research article · 6 May 2020
Conference abstractPublished 11 May 2017
Solar 3-D printer for lunar construction
Lavochkin Association, Russia
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
A concept of a 3-D printer on solar energy to build permanent constructions on the moon from lunar regolith and waste is proposed. The main part of printer is a spherical mirror that focuses the sunlight into the working spot. Very easily mirror can be made of a thin film mirror. At this point, the temperature reaches 5000 degrees. If solid particles of lunar regolite pour to this place, they will melt therein, and connected with the substrate. With a diameter of 4 meters focusing mirror regolite processing rate is 10 g / s. During the lunar day (14 Earth days), the printer will process 12 tones of regolith. The controlled movement of the spot will create a gas-tight space of any configuration entirely from local materials. The proposed construction of a 3-D printer does not contain a print head, in which the molten regolith may freeze during lunar night and disable it. After sunrise the printer will continue its work. After sunrise, the printer will continue its work. If you now run the printer on the Moon, at the time of landing astronauts on him, he will have a solid frame building, able to protect the crew from cosmic radiation. Constructed building will be necessary to ensure the transition hatches sealed and provide them with life-support systems. Russian Federal Space Program for 2016-2025 envisages the creation of the necessary groundwork for a full-scale lunar exploration after 2025 and the implementation by 2030 of landing a man on the moon. Laboratory and accommodations of a permanent station on the moon shall ensure full protection the crew from harmful cosmic radiation, in the first place - from hard solar radiation. In the absence of a protective atmosphere and magnetic field on the moon, the premises must be protected sufficiently thick coating of absorbent material. The thickness of the walls of the space module, developed for placement on the lunar surface, in 20 ... 40 times less than required. For full protection, would be enough 5-meter layer of of fused lunar regolith. We believe that it would be rational to build a multi-storey building with a wall thickness of 0.5 m. This will ensure maximum protection on the lower floors. Proposed 3-D printer for five years could construct a building with an area of about 150 m2 with a ceiling height 2.5 m
Subjects
Energy & PowerEngineeringAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 17 Sep 2018
Construction of a solid-state overall water-splitting photocatalyst, sensitive to red-light, for solar hydrogen production
Conference abstract · 2 Oct 2017
Construction of solar radiation simulation DB and solar radiation simulation system using GIS
Review article · 16 Mar 2016
Construction of human knee bone joint model using FDM based 3D Printer from CT scan images.
Case report · Feb 2023
Solar-Assisted Power Provide Gadget which is Utilized in Residential Constructions
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- SubjectEnergy & Power
- SubjectEngineering
- BylineArticles whose byline prints “Valentin K. Sysoev”
