Conference abstractPublished 15 Aug 2016
Hard segment multi-functionalized polyolefin-based high-temperature thermoplastic elastomer via anionic living and block graft polymerization followed by thiolene
Chungnam National University, Republic of Korea
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Conventional polyolefin-based thermoplastic elastomers have a variety of merit. But the copolymers including block, graft and blend types have some limitations due to their low use temperature. In this study, novel polyolefin-g-poly(t-butylstyrene) as one of the promising high utility temperature polyolefin-based thermoplastic elastomers was synthesized by the graft anionic living polymerization from the initiation of styrene unit form the poly(t-butylstyrene) hard grafts along the poly(ethylene-ter-1-hexane-ter-divinylbenzene) backbone as the soft block (0.3~0.5 mol% of graft sites). Phase-separation occurred in these polyolefin TPEs when the Mn of poly(t-butylstyrene) was more than 5,000 g/mol, which was evidenced by the presence of two distinct Tgs(-20°C of polyolefin soft block and 125°C of poly(t-butylstyrene) hard block) observed in DSC and DMTA. These high temperature polyolefin TEPs exhibited distinct mechanical property with high modulus and toughness even above 125°C. And when the content of P(t-butylstyrene) over 28wt%, excellent mechanical properties: high tensile strength (>21MPa) with high elongation (>1,100%) could be obtained, similar to that of S-EB-S(30wt% styrene content). The multi-carboxyl functionalized polyolefin-g-poly (t-butylstyrene) could be synthesized by the incorporation of high vinyl oligo-isoprene at the end of poly (t-butylstyrene) hard block via sequential anionic polymerization followed by the thiolene click reaction with thioglycolic acid to incorporate multi-carboxyl groups at the pendant vinyl units. The contact angle of these result multi-carboxyl functionalized polyolefin (12-COOH/molecule) was decreased to 58° compared to 95° in case of the non-functionalized polyolefin TPEs.
Subjects
ChemistryAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- SubjectChemistry
- BylineArticles whose byline prints “Bum Jae Lee”
