Research article · Apr 2014
Research articlePublished Dec 2013
Thermal Analysis and Optimization of I.C. Engine Piston Using Finite Element Method
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
In this study, firstly, thermal analyses are investigated on a conventional (uncoated) diesel piston, made of aluminium silicon alloy for design 1 and design 2 parameters. Secondly, thermal analyses are performed on piston, coated with Zirconium material by means of using a commercial code, namely ANSYS. The effects of coating on the thermal behaviours of the pistons are investigated. The finite element analysis is performed by using computer aided design software. The main objective is to investigate and analyze the thermal stress distribution of piston at the real engine condition during combustion process. This thesis describes the mesh optimization by using finite element analysis technique to predict the higher stress and critical region on the component. In this work, the main emphasis is placed on the study of thermal behaviour of functionally graded coatings obtained by means of using a commercial code, ANSYS on aluminium and zirconium coated aluminium piston surfaces. The analysis is carried out to reduce the stress concentration on the upper end of the piston i.e. (piston head/crown and piston skirt and sleeve). With using computer aided design NX/Catia software the structural model of a piston will be developed. Furthermore, the finite element analysis is done using Computer Aided Simulation software ANSYS.
Subjects
EngineeringAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Research article · 18 May 2016
Design and Performance Evaluation of Thermal Barrier Coated Engine Valve Using Finite Element Analysis
Research article · Dec 2013
Design and Static Structural Analysis of Cylinder and Piston of Two Stage Reciprocating Compressors Using ANSYS
Research article · 2015
Conventional Design and Static Stress Analysis of IC Engine Component (Crank Pin) Using the Finite Element Method
Research article · 30 Sep 2013
Thermal analysis of diesel engine piston
More from this journal
The newest in International Journal of Innovative Research in Science, Engineering and Technology.
Review article · 2018
Tech-Care: Personal Health Monitoring and Prediction System
Research article · 2018
Spectrum Sensing Methods for Cognitive Radio: A Survey
Review article · 2018
Utilization of Food Wastes to Prepare Film Forming Biomolecules (Retracted)
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalInternational Journal of Innovative Research in Science, Engineering and Technology
- SubjectEngineering
- BylineArticles whose byline prints “S. Srikanth Reddy”
- BylineArticles whose byline prints “Dr. B. Sudheer Prem Kumar”
