Research article · 2015
Research articlePublished Dec 2013
WALL ROUGHNESS EFFECTS ON SHOCK BOUNDARY LAYER INTERACTION FLOWS
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Shock boundary layer interaction flow features are encountered in many high speed engineering devices such as turbine blades, air wings, intake systems for ram jet engines, etc. In the past, much works have been performed to investigate the shock boundary layer interaction characteristics and various interesting conclusions like boundary layer thickening, boundary layer separation and reattachment, shock unsteadiness, etc were derived. These findings are mainly obtained for flow over smooth surfaces. The local flow states induced by shock boundary layer interaction can strongly depend on the wall surface roughness but no detailed investigations were carried out in this regard. In the present study, numerical simulations were used to investigate the flow characteristics produced by the interaction of shock wave on boundary layer over a rough wall. The variations in interaction length, characteristics of separation bubble and shock strength for roughened wall were compared to that of smooth wall case. The results show that shock strength decreases for rough wall simulation compared to smooth wall simulation. The shock location moves upstream as the wall roughness increases. Flow separation - reattachment distance decreases for a rough wall compared to smooth wall case mainly due to the decrease in pressure gradient across the shock. The rough wall produce much higher turbulent kinetic energy along the wall surface and this cause the flow variations to propagate more distance downstream of the shock position.
Subjects
EngineeringAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Review article · 8 May 2017
NUMERICAL SIMULATION OF BOUNDARY LAYER FLOW PARAMETERS BY USING WRF-ARW MODEL OVER A TROPICAL REGION
Research article · 2017
Soret and Dufour Effects on Unsteady Boundary Layer Flow and Heat Transfer of Nanofluid Over a Stretching/Shrinking Sheet: A Stability Analysis
Conference abstract · 3 Oct 2016
Heat transfer coefficient characterization in the thermal and hydrodynamic boundary layers of flowing fluids and evaporating thin-films
Research article · Jan 2015
Influence of Chemical Reaction, Heat Source, Soret and Dufour Effects on Heat And Mass Transfer in Boundary Layer Flow Over a Stretching Cylinder Embedded in a Porous Medium using Brinkman-Forchheimer Extended Darcy Model
More from this journal
The newest in International Journal of Innovative Research in Science, Engineering and Technology.
Review article · 2018
Tech-Care: Personal Health Monitoring and Prediction System
Research article · 2018
Spectrum Sensing Methods for Cognitive Radio: A Survey
Review article · 2018
Utilization of Food Wastes to Prepare Film Forming Biomolecules (Retracted)
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalInternational Journal of Innovative Research in Science, Engineering and Technology
- SubjectEngineering
- BylineArticles whose byline prints “Arun Kumar R”
- BylineArticles whose byline prints “H.D Kim”
