Scholars Central

Conference abstractPublished 24 Oct 2018

Nonlinear seismic analysis for regular and irregular structures

Authors: Piero Colajanni, S Pagnotta, G Testa

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

In past 20 years, several researchers have discussed the underlying assumptions and limitations of the pushover analysis. It has been found that, if a unique invariant force distribution proportional to the fundamental mode of vibration is assumed, satisfactory predictions of seismic demands are mostly restricted to regular in plane and in elevation low and medium-rise structures. Indeed, invariant force distributions are notable to take into account the redistribution of inertia forces due to yielding, and the associate change in the mode shape. Moreover, force distribution and displacement pattern related to the fundamental period of vibration do not account for the contribution of higher modes. To solve this drawback, Chopra (2003) proposed a method called modal pushover analysis (MPA), where the seismic demand due to the individual terms in the modal expansion of the earthquake forces is determined by a non-linear pushover analysis. To overcome the former limitations, and with the aims of bounding the likely distribution of interstory drifts and local ductility demands, seismic codes require that the analysis is performed enveloping the results obtained by using two different seismic force patterns: a load pattern aiming at reproducing the distribution of the seismic forces acting on the structure in the elastic state; an uniform or an adaptive load pattern aiming at bounding or reproducing the change in distribution of the seismic forces due to the progressive yielding of the structure. Numerical analyses performed in the last two decades have shown that the uniform load pattern is too conservative for the estimation of the response parameters for the lower floors of buildings, while all the adaptive load patterns proposed do not always succeed in providing a better estimation of the seismic response. In this context, in the proposed paper, firstly two very simple load distributions were proposed, one invariant and one adaptive. Each of the proposed load distributions is effective in bounding the seismic response of the structure without introducing the large overestimation of the seismic response. Regarding irregular structures, a modified version of the modal pushover in which correlation rule that takes into account the non-linear behaviour of structures is proposed. The effectiveness of the proposed load distributions are proved by comparison with the results provided by several lateral load distributions prescribed by international codes.

Subjects

Engineering

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Research & Reviews: Journal of Engineering and Technology.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalResearch & Reviews: Journal of Engineering and Technology
  • SubjectEngineering
  • BylineArticles whose byline prints “Piero Colajanni”
  • BylineArticles whose byline prints “S Pagnotta”
  • BylineArticles whose byline prints “G Testa”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels