Research article · Jul 2014
Conference abstractPublished 24 Oct 2018
Alkali Silicate Activated, Slag-Fly Ash Binders
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Sodium silicate activated, slag-fly ash binders (SFB) and slag-metakaolin binders (SMKB) are room temperature hardening binders that have excellent mechanical properties and a significantly lower carbon footprint than does Ordinary Portland cement (OPC). The aim of this study was three-fold. The first aim was to study the properties of precursors. Fly ash, slags and commercial metakaolins were characterized using energy dispersive x-ray fluorescence (EDXRF), X-ray diffraction (XRD), laser diffraction, Fourier transform infrared (FTIR) spectroscopy as well as magic-angle spinning, nuclear magnetic resonance (MAS-NMR) spectroscopy. The second aim was to develop a method to identify and quantify all poorly-ordered phases (unreacted precursors and products) present in SFB and SMKB. This was achieved by selective chemical extractions and MAS-NMR spectral subtraction of binders and extraction residues. The third aim was to observe the nanostructural evolution of the product phases with time, temperature and slag/fly ash ratio in SFB. This was accomplished by deconvoluting the MAS-NMR spectra. It was observed that the proportion of true geopolymer present was only 0-15 % and higher in SMKB when compared to SFB. Although C-N-A-S-H and geopolymer coexisted in SFB and SMKB, C-N-A-S-H was the major product phase formed. The mean chain length (MCL) and structure of C-N-A-S-H gel were estimated as a function of time, temperature and slag/fly ash ratio. The MCL decreased with increasing slag/fly ash ratio and decreased with increasing temperature. While increasing the slag/fly ash ratio accelerated the strength development, the cure time was decreased due to the formation of calcium silicate hydrate (CâÂ?Â?SâÂ?Â?H), calcium aluminum silicate hydrate (CâÂ?Â?AâÂ?Â?SâÂ?Â?H), and (Ca, Na) based geopolymer. No new crystalline phases evolved through 28 days in ambient- or heat-cured binders. Furthermore, the early age properties of slag - fly ash binders namely, set time, and heats of reaction were investigated. Set time was investigated using a combination of the ASTM C403 penetration testing, and s-wave ultrasonic wave reflectometry (SUWR). The discrepancy in set time identified by these two methods suggested the presence of a soft gel which eventually hardened with time. The composition of this soft gel was analyzed by suspending the chemical reaction of the binder after the soft gel formed, but before it hardened. In order to analyze the composition of the soft gel, selective chemical extractions were performed on the binder. 29Si MAS-NMR and FTIR spectroscopy were performed on binders and extraction residues. The soft gel contained a modified calcium silicate hydrate gel (C-N-S-H where N=Na), with a short mean chain length and no observable Al incorporation. Orthosilicate units were also found to be present in relatively high proportions when compared to hardened binders at later ages
Subjects
EngineeringAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Perspective · 28 Feb 2022
Alkali Activated Slag Cement Preparation and its Properties
Research article · Feb 2013
PERFORMANCE OF ALKALI ACTIVATED SLAG WITH VARIOUS ALKALI ACTIVATORS
Conference abstract · 26 Jun 2017
Advanced Composites Based on Silicate - Organic Nano-structured Binders
Conference abstract · 13 Jun 2016
Biomass thermodynamic and ash characterization for assessment of impact on boiler tube corrosion, slagging and fouling
More from this journal
The newest in Research & Reviews: Journal of Engineering and Technology.
Editorial · 31 Dec 2025
Predictive Analytics: Leveraging Data for Forecasting and Intelligent Decision-Making
Editorial · 31 Dec 2025
Quantum Computing: Revolutionizing Computation Beyond Classical Limits
Editorial · 31 Dec 2025
Software Development Life Cycle (SDLC): A Structured Approach to Building Reliable Software Systems
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalResearch & Reviews: Journal of Engineering and Technology
- SubjectEngineering
- BylineArticles whose byline prints “Waltraud M. Kriven”
- BylineArticles whose byline prints “Kaushik Sankar”
- BylineArticles whose byline prints “Andre Sutrisno”
- BylineArticles whose byline prints “Peter Stynoski”
