Scholars Central

Conference abstractPublished 29 Feb 2016

Lightweight concrete containing recycled plastic aggregates

Authors: Fahad Alqahtani

University of Birmingham, UK

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Concrete industry needs millions of tons of aggregate comprising natural sands and gravels each year. In recent years there is an increasing trend to use recycled aggregate with a view to saving natural resources and to produce lightweight concrete. With this in mind a study was undertaken to produce an recycled plastic aggregate (RPA) from easily available materials such as waste plastic and fillers such as red sand. A laboratory study was undertaken to investigate the physical properties of RPA. Also concrete compressive strength and durability, latter in terms of chloride migration were investigated. Results for two w/c ratios with 100% replacement of conventional lightweight aggregate (LWA) with recycled plastic aggregate (RPA) showed that reduction in strengths of about 50% and about 13% reduction in chloride penetration. Nonetheless, strengths of 12 to 15 MPa were achieved, and thus it can be possible for this aggregate to be used in areas where low strengths are required, such as low side building cementations backfill and others.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Similar by topic

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • BylineArticles whose byline prints “Fahad Alqahtani”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels