Research article · 30 Sep 2012
ArticlePublished 2008
A stability indicating RPLC method for aripiprazole
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
A simple, sensitive isocratic RP-LC method has been developed for the quantitative determination of aripiprazole in both bulk drug and pharmaceutical dosage forms, used as a typical antipsychotic drug. The developed method also applicable for the related substances determination. Efficient chromatographic separation was achieved on a Kromasil C8, 150mm4.6mm, 5mcolumnwith simplemobile phase combination delivered in an isocratic mode and quantification was carried out using ultraviolet detection at 215 nm with a flow rate of 1.0 mL min-1. The mobile phase contains a mixture of buffer and acetonitrile in the ratio of 65:35 (v/ v). Buffer consists of 30mMsodium dihydrogen phosphate monohydrate and 5mM hexane-1-sulfonic acid sodium salt, pH adjusted to 2.5 using phosphoric acid. In the developed HPLC method the resolution (Rs) between aripiprazole and for its potential five impurities in bulk drug was found to be greater than 2.0. Regression coefficient (r2) value of greater than 0.99 for aripiprazole and it’s all the five impurities shows good linearity of the developed method. This method was capable of detecting all five impurities of aripiprazole at a level of 0.009% with respect to test concentration of 0.5 mg mL-1 for a 5L injection volume. The inter and intraday precision for all five impurities and aripiprazole were found to be within 2.0% RSD at its specification level. The method has shown good and consistent recoveries for aripiprazole (98.4-100.6%) and for it’s all the five impurities (93.5-106.2%). The test solution was found to be stable in the diluent for 48h. The drug was subjected to stress conditions of hydrolysis, oxidation, photolysis and thermal degradation. Considerable degradationwas found to occur in alkaline mediumand in oxidative stress conditions. The stress samples were assayed against a qualified reference standard and the mass balance was found close to 99.4%. The developed RP-LCmethod was validated with respect to linearity, accuracy, precision and robustness.
Subjects
ChemistryAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Short communication · 15 Mar 2021
Chemical Sciences and Advanced Chromatography 2019: Stability-indicating HPLC method of forced degradation products of catecholamines - Leticia Coli Louvisse de Abreu - Federal University of Rio de Janeiro
Research article · 29 Jun 2017
Forced degradation study of rifaximin formulated tablets to determine stability indicating nature of hplc method
Review article · 2017
Forced Degradation Study an Essential Approach to Develop Stability Indicating Method
Research article · 31 May 2015
Forced degradation studies of a new antileishmanial molecule using a stability-indicating RP-HPLC method
More from this journal
The newest in Analytical Chemistry: An Indian Journal.
Editorial · 4 Dec 2025
Sample Preparation Techniques: Foundations and Applications in Analytical Science
Editorial · 4 Dec 2025
Microfluidics: Principles, Techniques, and Applications in Modern Science
Editorial · 4 Dec 2025
Data Analysis in Chemistry: Transforming Raw Information into Scientific Insights
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalAnalytical Chemistry: An Indian Journal
- SubjectChemistry
- BylineArticles whose byline prints “D.V.Subba Rao”
- BylineArticles whose byline prints “Satheesh Kumar Shetty”
- BylineArticles whose byline prints “P.Radhakrishnan”
- BylineArticles whose byline prints “V.Himabindu”

