Scholars Central

Conference abstractPublished 24 Sep 2018

Simulation and development of counter weight casting

Authors: K Koushik, Nataraj J R, Krishna M, Karthik S B

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

There is renewed interest in sand casting components due to new technological developments and simulation techniques. Several researchers have developed algorithms and softwares to simulate casting process and predict defects such as porosity, blow holes, cracks and cold shuts. The objective of this paper is to obtain defect free counter weight casting (component) by best gating system based on flow simulation. CAD model of one such critical component counter weight is done in ADSTEFAN software where process parameters like weight, type and temperature of the molten metal and no-bake sand are given as input and flow simulations of three iterations of different gating systems to obtain defect free casting are performed. Actual castings for three gating systems are developed and results (defects) are compared. From first principle, the sizes of risers and flow offs are calculated with cross sections being either rectangular/cylindrical/conical shapes. Pressurized gating system is considered with a D: R: I (Down sprue: runner bar: Ingate) ratio is 1: 1.6: 0.9. Due to improper location of ingates and risers shrinkage formation is about 8-11% and 11-15% by volume in first and second iterations respectively. Installing of sleeve risers (at the point prone to casting defects) at hot spot where solidification ends results in reduction of volumetric shrinkage by 98%. Time taken to fill the mould cavity by molten metal is about 24-26 s for all three iterations. Visual inspection of actual counter weight casting of 1st and 2nd iteration showed the formation of shrinkages, cold shuts and surface blow holes and 3rd iteration showed no defects. Hence, third iteration gating system was recommended for manufacturing. Recent Publications 1. K Koushik (2018) Design, Impact, Simulation Studies of Tubular Chassis of an all-terrain Vehicle Metals, Materials and Manufacturing Conference held in Singapore March 12-13th 2018, I: 10.5176/2251-1857_M318.12. 2. K Koushik and Nataraj J R (2018) Impact studies of Roll cage of All Terrain Vehicle. International Journal of Engineering, Global Science and Technical Forum.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Similar by topic

More from this journal

The newest in Research & Reviews: Journal of Material Sciences.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalResearch & Reviews: Journal of Material Sciences
  • SubjectMaterials Science
  • BylineArticles whose byline prints “K Koushik”
  • BylineArticles whose byline prints “Nataraj J R”
  • BylineArticles whose byline prints “Krishna M”
  • BylineArticles whose byline prints “Karthik S B”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels