Scholars Central

Conference abstractPublished 29 Jan 2019

Nanoparticles for soft ferrites: Influence on sintered microstructure

Authors: Carolina Clausell Terol, Antonio Barba Juan, Juan Carlos Jarque Fonfria, Luis Nuno-Fernandez

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Cu-doped NiZn ferrites are typical electromagnetic wave absorbers which absorption capacity (calculated from experimental measures of complex permeability and complex permittivity for a given frequency range) is related to thickness body and especially and more critical to its microstructure. Ideal microstructure would consist of sintered bodies with no porosity, small average grain size and narrow grain size distribution. Moreover, the finer grain sizes the better absorption capacity. Literature shows that physical properties of ceramic bodies improve when particle-size distribution decreases from the micro-scale to the nanoscale. Ferrites from nanoparticles have been sintered controlling average grain size and relative density with sintering temperature. Green microstructure has been set constant using uniaxial dry pressing at 200 MPa as the shaping method. Sintered microstructure has been observed by Scanning Electron Microscopy (SEM), obtaining the average grain size by image analysis of the SEM micrographs. Relative density was determined by the Archimedes method, using true density material value. Magnetic permeability was measured in the frequency range from 1 MHz to 3 GHz by using an Agilent model E4991 ARF impedance analyzer with the 16454A test fixture and this later parameter has been related to average grain size and relative density. Finally, the results obtained from nano-particulate ferrite powder have been compared with those previously obtained from micro-particulate ferrite powders, noting an improvement in performance. Aknowledgements The study has been partially funded by the Spanish National Plan for Scientific Research, Development, and Technology Innovation of the Spanish Minister of Economy and Competitiveness (project MAT2016-76320-R) and the Jaume I University of Spain (project UJI-B2017-48).

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Similar by topic

More from this journal

The newest in Research & Reviews: Journal of Material Sciences.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalResearch & Reviews: Journal of Material Sciences
  • SubjectMaterials Science
  • BylineArticles whose byline prints “Carolina Clausell Terol”
  • BylineArticles whose byline prints “Antonio Barba Juan”
  • BylineArticles whose byline prints “Juan Carlos Jarque Fonfria”
  • BylineArticles whose byline prints “Luis Nuno-Fernandez”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels