Scholars Central

Conference abstractPublished 29 Jan 2019

Novel flax composites functionalized by polypyrrole for shipbuilding application

Authors: Rosalinda Caringella, Alessia Patrucco, Marina Zoccola, Claudio Tonin

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

In this research work novel polymeric composites reinforced with functionalized natural fibers have been produced, in order to replace fiberglass reinforcement in shipbuilding industry. The substitution of glass fibers with ligno-cellulosic fibers brings advantages also in terms of weight of the composites which results lighter than fiberglass ones, moreover it solves the issues linked to the complexity of the disposal procedure and the health risk of fiberglass composites. Different types of technical flax fabrics and felts, having different weight and fibers orientation were used as reinforcement after functionalization by polypyrrole, a conductive organic polymer which confers antistatic and EMI shielding properties, bacterial resistance and good compatibility with non-polar polymeric matrices. Polypyrrole functionalization was carried out by in situ polymerization of pyrrole monomer, using ammonium persulfate as oxidant. The fabrics were dipped in pyrrole and oxidant solutions for 2 hours under mechanical stirring then a polyester resin commonly used in shipbuilding industry was applied on treated fabrics to produce the composites. The composites were characterized for surface functionalization, morphology, thermal and mechanical behavior in order to establish their applicability in shipbuilding industry. Chemico-physical characterization showed that polypyrrole functionalization not affected the compatibility between fabrics and polyester resin. The novel composites exhibit lowest tenacity and elastic modulus than fiberglass but showed comparable specific module, considering the specific density of the materials. Thermal analysis showed that functionalized fabrics degraded at slightly lower temperature but with lower heat release rate of the degradation process. The shift of the degradation temperature resulted more evident with the increase of the amount of polypyrrole on fabrics surface. Moreover, the composites reinforced with flax fabrics showed a significant reduction of the carbon residue which can be traduced into an advantage in terms of disposal by incineration and solves the problem of glass fibers dispersion.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalResearch & Reviews: Journal of Material Sciences
  • SubjectMaterials Science
  • BylineArticles whose byline prints “Rosalinda Caringella”
  • BylineArticles whose byline prints “Alessia Patrucco”
  • BylineArticles whose byline prints “Marina Zoccola”
  • BylineArticles whose byline prints “Claudio Tonin”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels