Scholars Central

Conference abstractPublished 11 Sep 2017

Solvent-induced effects in polymer-wrapped s-SWNTs based fully printed field-effect transistors

Authors: Isis Maqueira Albo, Giorgio Dell’ Erba

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Despite the emergency of competing materials carbon nanotubes remain at the fore-front of the promising materials for organic electronics like field-effect transistors. Due to their properties, are among the most suitable structure to support the current advancements goals in flexible electronics. However, very few are the ways to make stable single walled carbon nanotubes (SWNT) dispersions for simple processing. To further push the adoption of this kind of devices in everyday life applications, high-throughput dispersion and fabrication methods must be adopted. In this work, we highlight how a simple process for chirality selection and dispersion of semiconducting SWNT may be used for the realization of all-printed Field Effect Transistors. Chirality selection is operated by polymer-wrapping of the s-SWNTs with poly [(9, 9-dioctylfluorenyl-2,7- diyl)-alt-co-(6,6âÂ?Â?-{2,2âÂ?Â?-bipyridine})] in common organic solvents, with a process optimized for the [6,5] chirality selection. After solution purification, wrapped nanotubes can be dispersed in those solvents suitable for printing. The printing process was performed in ambient air and at room temperature, and the SWNT ink was dispense using a nozzle with an orifice diameter of 60Ã?¼m over pre-patterned source and drain electrodes. The devices exhibit ambipolarity, with a slight prevalence of the n-type behavior. For both electron and hole accumulations, at VDS = Ã?± 5V (linear regime) 106 on-off ratios can be observed, with mobilities (Ã?¼lin) around 0,3 cm2V-1s-1 for both carrier types. In saturation regime (VDS = Ã?± 60 V) mobility values (Ã?¼sat) up to 0.8 cm2V-1s-1 for electrons and 0.65 cm2V-1s-1 for holes are reached. The study also highlights the effects of different solvents on the carbon nanotube network formation and transistor performances with best results with those solvents that tend to form polymer pre-aggregates in the printed solution.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Research & Reviews: Journal of Material Sciences.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalResearch & Reviews: Journal of Material Sciences
  • SubjectMaterials Science
  • BylineArticles whose byline prints “Isis Maqueira Albo”
  • BylineArticles whose byline prints “Giorgio Dell’ Erba”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels