Scholars Central

Conference abstractPublished 29 Jun 2017

Guide to best practices for specifying and operating small scale biomass gasification power projects in developing countries

Authors: Kamalesh Doshi

Simplify Energy Solutions LLC, USA

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

The biomass gasifier is a relatively inexpensive alternative to diesel and gasoline generation of electricity, for small scale off-grid and distributed generation; particularly in developing countries facing high fuel prices, but they have ample sustainable biomass resources. This guide book provides the best practices to owners who have recently installed or are anticipating installing biomass gasification power projects to ensure success. The guide book recommends best practices for specifying and operating small scale biomass gasification power projects. The best practices will accelerate the market penetration of small-scale biomass gasification systems (< 1 MW power) by assisting operators and end-users/investors in planning, assessing the potential risks and imposing realistic measures and operating the projects. The best practices are developed using the knowledge acquired through experience and research and also based on the recommendations of original equipment manufacturers and current industry practices. This guide also provides an overview of typical biomass gasification power projects and components, experience so far, lessons learned and guidance for installation, operation, troubleshooting, preventive maintenance, repair and replacement, training, and safety. This guide book should be used in conjunction with site-specific and equipment-specific guidance provided by design organizations and equipment manufacturers. Biomass gasification converts solid carbon fuels/ wastes (such as rice husk, wood chips, stalks, animal manure, domestic garbage, sewage, etc.) into combustible gases, called syn gas or producer gas, by a process of partial combustion. The syn gas, after the processes of dust/tar removal, dewatering and cooling is sent into gas engine to drive generators. It is fairly simple to produce combustible gases from wood; the real challenge is to provide a syn gas that is conditioned for use in gas turbines or reciprocating engines. Along with the syn gas, the gasifier will also produce waste water, solid ash, soot, and tars depending on the technology used.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Fundamentals of Renewable Energy and Applications.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Fundamentals of Renewable Energy and Applications
  • SubjectEnergy & Power
  • BylineArticles whose byline prints “Kamalesh Doshi”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels