Conference abstract · 28 Mar 2019
Conference abstractPublished 13 Jun 2016
Corrosion and wear resistance of PEO coatings containing graphite nanoparticles produced on magnesium alloys
University of Padua, Italy
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Plasma Electrolytic Oxidation (PEO) is a very promising process that can enhance the corrosion and wear resistance by producing a relatively thick, dense and hard oxide ceramic coating on light alloys. The corrosion and wear behaviour of the treated samples strongly depends on some process parameters: current density, voltage, treatment time and electrolyte composition. In particular, the addiction of additives in the electrolyte produces significant changes in the resistance of the obtained coatings. In literature several works can be found concerning the addiction of silicon carbide or graphite particles in PEO coatings, in order to improve the wear resistance on aluminium alloys. However, there is little knowledge regarding the improvement of wear resistance of PEO treated magnesium alloys. In this work, 3g/l of graphite nanoparticles were added to an electrolyte containing sodium phosphates and sodium silicates in order to improve the wear resistance of the coatings produced on AZ91 and AZ80 magnesium alloy. Treatments were conducted at high current densities and short treatment times (two different treatment times were tested). The thickness, the morphology and the composition of the coatings were studied with SEM-EDS and XRD. The wear resistance was analyzed with a tribometer and the corrosion resistance of the samples was studied with potentiodynamic polarization tests and EIS tests. The results showed that the graphite nanoparticles seal the pores that characterize the typical surface of a PEO treated magnesium alloy. This fact produced an improvement both in the corrosion resistance and in the wear resistance.
Subjects
Materials ScienceNanotechnologyAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 30 Mar 2016
Effect of air plasma sprays parameters on coating performance in WC-based high temperature wear and corrosion resistance coatings on steel alloys of aero-engine
Conference abstract · 29 Feb 2016
Improved corrosion and wear resistance of laser alloyed Zn-Sn-Ti composite coatings on UNS G10150 steel in 0.5M H2SO4 solution.
Conference abstract · 14 Sep 2015
Improved corrosion and wear resistance of laser alloyed Al-Sn coatings on UNS G10150 steel in acidic environment: Artificial neural model approach
Conference abstract
Improved corrosion and wear resistance of laser alloyed Zn-Sn-Ti composite coatings on UNS G10150 steel in 0.5 M H2SO4 solution
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- SubjectMaterials Science
- SubjectNanotechnology
- BylineArticles whose byline prints “Luca Pezzato”
