Scholars Central

Conference abstractPublished 11 Oct 2017

Advanced poly dimethylsiloxane-urea copolymer based masterbatches with multiple functionality

Authors: Hans-J. Radusch, Matthias Huebner, Friedhelm Roeber, Andre Wutzler, Nadine Poenisch

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Optical and esthetic modification is a basic need for polymer application in all technical and consumer fields. Colorants are used in broad volume to satisfy the demand of costumers for that purpose. Organic or inorganic colorants are included in a carrier polymer, which should help to dose the colorant precisely, to mix it homogeneously, to be compatible with the matrix, and it should not influence the mechanical and rheological properties unfavourably. A colorant masterbatch on the basis of polydimethylsiloxanepolyurea copolymer (PDUC) was developed. The masterbatch was generated by an innovative processing technology coupling a pre-dispersion step and a fluid component based reactive extrusion step. A specific twin-screw extruder with feeding units is used for the liquid initial components polydimethylsiloxane (PDMS) including the pre-dispersed colorant as well as the diisocyanate. The precise stoichiometric ratio of the components as well as the optimization of residence time of the polymer in the extruder in concern to the reaction time of the components allowed the generation of the PDUC based masterbatch. Different isocyanates and aminopropyl terminated PDMS were used. A higher number of thermoplastics was involved into the investigation of the suitability of the generated masterbatches. Beside the nearly universal applicability of the masterbatch, the improvement of processibility - expressed by lowering of the viscosity, reduction of energy consume of the extruder or reduction of rejection forces at injection molding - could be demonstrated. Thus, the masterbatch proves to be not only an effective colorant, but also an internal lubricant. The good dispersion of the pigment particles was demonstrated by optical microscopy. Stress-strain measurements proved that no significant negative influence of the new masterbatch in concentrations < 5 % on the mechanical properties of the investigated thermoplastics could be observed. Furthermore could be shown that the masterbatch composition and manufacturing technology is suitable as carrier for the inclusion of nano-particles into polymer materials.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Similar by topic

More from this journal

The newest in Research & Reviews: Journal of Material Sciences.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalResearch & Reviews: Journal of Material Sciences
  • SubjectMaterials Science
  • BylineArticles whose byline prints “Hans-J. Radusch”
  • BylineArticles whose byline prints “Matthias Huebner”
  • BylineArticles whose byline prints “Friedhelm Roeber”
  • BylineArticles whose byline prints “Andre Wutzler”
  • BylineArticles whose byline prints “Nadine Poenisch”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels