Scholars Central

Conference abstractPublished 11 Oct 2017

Study of electrically conductive water-based polyurethane

Authors: Valentina Caba, Ferrari srl, Laura Borgese, Laura E. Depero

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Electrically conductive polymers have shown great potential for several applications in electronic, environmental, and biomedical fields. In particular, polyurethane is used in electromagnetic shields1, in electrodes for capacitive deionization in the desalination process of brackish water4, and in electrodes for electrocardiography2 and electroencephalography monitoring3, and electrostimulation5. Conductive composite materials can be realized as compact (film) or porous (foam) layers, depending on the process. For polyurethane, literature reports different recipes depending on the final material features. This implies the use of a wide range of reagents and additives, and it goes against the tendency of manufacturing companies focusing on the reduction of chemical products and raw materials in their processes. The purpose of this study is the industrial development of electrically conductive water-based polyurethane, suitable both for foam and film casting. In this study, polyether, polyester, and polycarbonate based polyurethane is used and mixed with different cross-linkers and conductive fillers. Five different compounds in similar concentration are compared as cross-linkers. Different loadings of silver based conductive fillers are used. The foam is obtained by mechanical frothing from the mixture of components used for the film. Paper transfer coating process is used to realize both films and foams for testing. Different paper release materials are considered. Surface resistivity is measured by two-point probes method. Results show that the conductivity of the material depends on all the considered variables in different ways. The main contribution is given by the conductive filler loading, with a percolation threshold about 45% wt. The surface resistivity increases about three orders of magnitudes from film to foam. This loss of conductivity can be recovered by increasing the filler loading. The water-based conductive polyurethane prepared in this work, can be successfully realized in porous or compact layers by industrial process manufacturing, with a cost-saving formula using reduced number of components.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Similar by topic

More from this journal

The newest in Research & Reviews: Journal of Material Sciences.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalResearch & Reviews: Journal of Material Sciences
  • SubjectMaterials Science
  • BylineArticles whose byline prints “Valentina Caba”
  • BylineArticles whose byline prints “Ferrari srl”
  • BylineArticles whose byline prints “Laura Borgese”
  • BylineArticles whose byline prints “Laura E. Depero”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels