Research article · 16 Mar 2026
Conference abstractPublished 13 Dec 2017
Accelerated corrosion test for exhaust gas recirculation exchangers
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Economic and environmental drivers are leading to exchanger weight reduction for automotive applications. The consequence is a material downgauging and some critical conditions reached. One of the exchangerâÂ?Â?s main failure modes is induced by transient differential dilatations between the exchanger components. In this work, a detailed characterization of the cyclic damage mechanisms in car heat exchangers has been undertaken in order to improve their reliability. The studied material is a very thin (<0.3 mm) aluminum sheet composed of 3 layers (4XXX /3XXX/ 4XXX) (figure 1) compared to the same aluminium sheet made of 1 layer (3XXX), brazed in similar conditions to those of real components. Fatigue tests at constant stress amplitude have been performed at room temperature to show the influence of the clad in the fatigue resistance. Tensile properties between the clad alloy and the unclad alloy are strictly identical. However, the WÃ?¶lher curve shows a high fatigue resistance for the unclad material compared to the cladded one. (Figure 2). Fractography analysis on the 3 layer alloy reveals that the crack initiation is intergranular on the clad side and occurs on the specimen face because the clad is harder than the core which weakened the grain boundaries leading to multifissuration initiation and propagation. Cracks stopped for about 50% of the fatigue life then there is a transgranular propagation of the crack until failure. Concerning the unclad material, the elements Cu, Fe, Si, Mn and Ti are better distributed in the alloy thickness leading to a less modified surface state and decreasing the site initiation number and therefore the multifissuration. Thanks to microstructure, tomography and surface rupture analysis a fatigue damage mechanisms can be proposed, showing the residual clad layer key influence on the crack initiation.
Keywords
Subjects
Materials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Research & Reviews: Journal of Material Sciences.
Editorial · 31 Dec 2025
Time of Arrival (ToA): Principles Techniques and Applications in Modern Systems
Editorial · 31 Dec 2025
Carbon-Based Nanoparticles: Structure Properties and Advanced Applications
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalResearch & Reviews: Journal of Material Sciences
- SubjectMaterials Science
- BylineArticles whose byline prints “Anne-Gaelle Villemiane”
- BylineArticles whose byline prints “Josselin Paturaud”
- BylineArticles whose byline prints “Armelle Danielou”
- BylineArticles whose byline prints “Jean-Yves Buffiere”
- BylineArticles whose byline prints “Damien Fabregue”
