Short communication · 31 Mar 2025
Research articlePublished 2013
Simulated multi-crystalline silicon solar cells with aluminum back surface field
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
In photovoltaic solar cells manufacturing, we are confronted to the perpetual challenge for conversion efficiency enhancing. We propose in this work to quantify the back surface field aluminium (Al- BSF) rear contact effect deposited by screen printing metallization. Al-BSF numerical simulation has been performed by the use of softwares dedicated to photovoltaic like PC1D, SCAPS 2.7 andAFORS-HET. In this work, a SiNx/Si(n+)/ Si(p)/Si(p+) structure is studied. Thismeans that we have a classical junction np passivated at the front face with SiNx antireflective coating (ARC) and at the rear face a screen printed Aluminum contact. The back Al-BSF, must to be thick (no least 10µm) and highly p-doped (holes concentration between 1018 and 1019 cm-3) in order to reduce effective rear recombination velocity, yielding to an enhancement of theAl layer performance. Were inserted in the software parameters data: the lifetime measured for the inner bulk (ï´n=30 µs and ï´p=90 µs) with Al diffusion (10.8 µm deep). For emitter doping equals to 1.5*1020 cm-3, front surface recombination velocity Sf=8600 cm/s and the effective minority diffusion length Leff=227 µm. After simulation of the input parameters, an efficiency of 18.0%is obtained by PC1D, in good accordance with the results presented in the literature. While the obtained efficiencies results with AFORS-HET and SCAPS 2.7 are 17.15%and 18.73%respectively.Arapprochement occurs between PC1D and SCAPS quantum efficiency curves with begin values ï¾ 70% QE while AFORS-HET is so far with ï¾ 34%QE.
Subjects
Materials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Materials Science: An Indian Journal.
Short communication · 31 Mar 2025
High-Performance Metallic Alloys: From Structural Applications to Functional Devices
Short communication · 31 Mar 2025
Spintronics and Magnetic Materials: Bridging Quantum Phenomena with Device Engineering
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalMaterials Science: An Indian Journal
- SubjectMaterials Science
- BylineArticles whose byline prints “R.Tala-Ighil”

