Conference abstractPublished 19 Dec 2020
Boosting Electrical Performance of InGaN solar cells
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Recent studies have shown that group III nitrides semiconductor has significant potential in the photovoltaic applications [1, 2] and among these, InGaN alloy is a promising candidate for thin film solar cell. It is also considered as the new super material that replace conventional silicon material and even graphene in the next generation nanoelcectronics devices due to its unique set of material, electrical and optical properties. The aim of this work is to simulate the maximum conversion efficiency of InGaN based thin film solar cell structure with the best junction configurations and parameters by SCAPS-1D software [3]. This computer simulation program was developed by Department of Electronics and Information Systems (ELIS), a University of Gent, Belgium. It has been extensively tested in solar cells by M. Burgelman et al. [4, 5]. SCAPS is capable of solving the basic semiconductor equations, the Poisson equation and the continuity equations for electrons and holes. SCAPS calculates solution of the basic semiconductor equations in one dimensional and in steady state conditions. These investigations provide a one alternative solution and identify the current research challenge that is anticipated new direction for solar cell technology. Figure 1 describes the different layers of the materials used in the part of a PV device and the conventions used in this study under the following parameters: solar spectrum AM1.5, P = 100 mW/cm2 and T = 300 K. The Shockley-Read-Hall (SRH) interface approach allows carriers from both conduction and valence bands to participate in the interface recombination process. The solar cell structure consists of three different layers: ZnO (antireflective), CdS or SnS (buffers), and InGaN monolayer (absorber). In this work we study the effects of CdS and SnS buffer layers on the electrical parameters, such as the short circuit current density (Jsc), open circuit voltage (Voc), fill factor (FF) and conversion efficiency (Æ?).
Keywords
Subjects
NanotechnologyAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Nanosciences: Current Research
- SubjectNanotechnology
- BylineArticles whose byline prints “Beddiaf Zaidi”

