Scholars Central

Conference abstractPublished 19 Dec 2020

Graphene-based nanocomposite for lithium-ion batteries anodes

Authors: Piotr Zawadzki, Bartosz Bucholc, Lukasz Kaczmarek

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Lithium-ion batteries (LIBs) are one of the most popular secondary batteries for consumer electronics and, lately, for electric vehicles application. Their main advantages over other rechargeable batteries are high energy density, good cycle life, high coulombic efficiency, low self-discharge rate, low maintenance and high cell voltage. The increasing demand for high performance LIBs entails large number of scientific researches focused on developing new electrode materials with better cyclability and high-energy storage capacity. In terms of capacity enhancement, the most promising material for the anode is silicon which theoretical capacity is 4200 mAhg-1 (in comparison to 372 mAhg-1 for the commercially most widely used graphite). Unfortunately, its implementation is limited due to the safety issue related to the huge volume expansion that takes place during charge/discharge cycle. One approach that addresses the mentioned problem is nanotechnology. Recently, in situ HRTEM observation of Si nanoparticles during lithiation process showed that there is a critical particle size for which the mechanical fracturing of the SEI layer can be avoided. Graphene, a single layer of hexagonally arranged sp2 carbon atoms, attracts a great interest as a material that can replace graphite as an active material in anodes of LIBs. Its properties like high theoretical specific surface area, intrinsic carrier mobility, great mechanical strength could significantly increase performance of batteries. In this research graphene-based nanocomposite was synhtesized for application as the anode active materials in lithium-ion battery. Three methods were employed: (a) mechanical mixing of reduced graphene oxide (rGO) powder with silicon nanopowder, (b) mixing of rGO with Si nanopowder in isopropyl alcohol and (c) spatial functionalization of graphene oxide using hydrazine. The molecular systems with variable silicon content and, in the case of cross-linked structures, variable hydrazine content were produced. FTIR, Raman, SEM, TEM investigations as well as galvanostatic charge/discharge and cyclic voltammetry measurements.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Nanosciences: Current Research.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Nanosciences: Current Research
  • SubjectNanotechnology
  • BylineArticles whose byline prints “Piotr Zawadzki”
  • BylineArticles whose byline prints “Bartosz Bucholc”
  • BylineArticles whose byline prints “Lukasz Kaczmarek”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels