Conference abstract · 12 Jun 2017
Research articlePublished 2016
Intermetallic-reinforced boron carbide (B4C) composites produced through stir casting processing
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The present study is aimed to evaluating the mechanical properties of aluminium metal matrix composite (AMMC). An effort is made to enhance the mechanical properties like hardness, tensile strength, yield strength, % of elongation of AMMCs by reinforcing AA6061 matrix with Boron carbide (B4C) particles. AMMCs were made, AA6061 as matrix material and B4C as reinforcement material, through stir casting method. AMMCs with varying percentage by different wt. %, 1%,2 %, 3%, 4%,5% B4C were fabricated. Asystematic study of the matrix metal and AMMCs were done to evaluate the mechanical properties (hardness, yield strength and tensile strength) in as cast and heat treated condition. It was observed that in comparison to the matrix metal, the precipitation kinetic was accelerated by adding the B4C particles. It was noticed that, mechanical properties are increase with the increase in wt. % of the reinforcement up to 4% B4C further addition there is a diminution in both the conditions (as cast and cold rolling followed by heat treatment condition). It was also thoughtout that 4% B4C composite shows better mechanical (hardness, yield strength and tensile strength) properties and low % of elongation than all other compositions in both the conditions. Optical microscopy and Scanning electron micrographs were carried out to authenticate the mechanical properties of the matrix metal and AMMCs.
Subjects
Materials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Research article · 2017
Melt Infiltration Casting of Alumina Silicon Carbide and Boron Carbide Reinforced Aluminum Matrix Composites
Perspective · 18 Oct 2021
The behaviou of boron carbide (b4c) powder on borax/pmma composite surface
Short communication · 13 May 2021
The behaviou of boron carbide (b4c) powder on borax/pmma composite surface
Research article · 2015
Al2O3 nano-particle reinforced aluminium matrix composites through stir casting technique
More from this journal
The newest in Composite Materials: An International Journal.
Research article · 30 Jun 2016
Utilization of carbonized palmkernel shell as filler in natural rubber composite
Research article · 2016
Studies on the rheological properties of cashew nut shell powder (anacardium accidentale) and carbon black on natural rubber vulcanisates
Research article · 2016
Thermo-optical and electro-optical response of binary mixture of liquid crystalline materials
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalComposite Materials: An International Journal
- SubjectMaterials Science
- BylineArticles whose byline prints “E.Subba Rao”
- BylineArticles whose byline prints “N.Ramanaiah”
