Scholars Central

Research articlePublished 2014

Matrix Acidizing Characteristics in Shale Formations

Authors: James Sheng, Samiha Morsy, Ahmed Gomaa, Soliman MY

Journal of Petroleum & Environmental Biotechnology

Volume 5 · Issue 5 · Pages 1–10

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Matrix acidizing is typically used to remove drilling and completion damage to reservoir conductivity around the wellbore and dissolve calcite in natural fractures. Despite being a common procedure, few studies have investigated the effect of matrix acidizing on the physical properties and oil recovery factors in shales. This paper describes the effect of HCl acid on porosity, spontaneous imbibition, mechanical properties, and crack distribution in samples from the Eagle Ford, Mancos, Barnett and Marcellus shale formations. Some of the samples were completely immersed in different HCl solutions (1-3 wt%) at 93°C. We measured the porosity in both the acid-treated and non-treated samples. The treated and non-treated samples were then exposed to spontaneous water imbibition experiments to measure the improvement in oil recovery in both parallel and perpendicular to bedding planes. The mechanical properties of the acid-treated and non-treated samples were also measured in both parallel and perpendicular to bedding planes using the same acid concentrations. The samples were 2.54 and 3.81 cm in diameter and 2.54 to 5.08 cm in length. The measured porosities were 1-3% for the non-treated samples and 1.3-10.5% for the treated samples. We observed that the oil recovery factors of the spontaneous imbibition for the samples treated with acid were 47% from Eagle Ford, 53% from Mancos, 28% from Barnett, and 38% from Marcellus. The recovery factors from the non-treated samples were 12% from Eagle Ford, 4% from Mancos, 13% from Barnett, and 3% from Marcellus. Furthermore, we observed that spontaneous imbibition parallel to bedding planes is higher than imbibition in perpendicular to bedding planes direction, especially for Marcellus samples where the recovery factors varied from 4% for the samples drilled parallel to bedding planes to 38% for the samples drilled in perpendicular to bedding planes. Eagle Ford and Mancos samples showed a reduction in confining compressive strength ranging from 50- 60% when exposed to 3 wt% HCl solutions with more reduction in the samples drilled parallel to bedding planes.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Similar by topic

More from this journal

The newest in Journal of Petroleum & Environmental Biotechnology.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Petroleum & Environmental Biotechnology
  • SubjectEnvironmental & Earth Sciences
  • SubjectBiochemistry & Biotechnology
  • SubjectPetroleum & Mining
  • BylineArticles whose byline prints “James Sheng”
  • BylineArticles whose byline prints “Samiha Morsy”
  • BylineArticles whose byline prints “Ahmed Gomaa”
  • BylineArticles whose byline prints “Soliman MY”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels