Scholars Central

Conference abstractPublished 8 Nov 2017

Amino-functionalized mesoporous silica-based adsorbent for CO2 post-combustion capture

Authors: Mohammad R M Abu Zahra

Masdar Institute of Science and Technology, UAE

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Conventional method capturing CO2 using amine solution has been well-known and practiced in natural gas purification for long time, but it involves high energy demand, corrosion and degradation and not suitable to capture CO2 from industrial sources like power plant flue gas. Amino-functionalized mesoporous silica adsorbent has emerged as a promising material for CO2 post-combustion capture due to its possible reduction in regeneration energy, cheap price and ease to produce at large scale. Different types of adsorbents have been prepared by impregnating amines or grafting amino functional groups on inexpensive mesoporous silica and tested for CO2 capture. Polyethyleneimine impregnated mesoporous silica (PEIMPS) possesses high CO2 loading (above 11 mg/g), it is easy to be produced at large scale and stable for multiple adsorption/ regeneration cycles operating in a packed bed reactor. It lost only 16.6% CO2 loading after 335 adsorption/regeneration cycles at 65/120oC, respectively. At high temperature, PEI-MPS encounters the vaporization of PEI causing a quick degradation, particularly in fluidized bed reactor. Amino-functionalized mesoporous silica (APTES-MPS) is synthesized by grafting method, in which, amino-functional groups form a chemical bond to silica substrate through Si-O-Si bridges. Thanks to the chemical bonding, APTES-MPS is more thermally and mechanically stable; it starts degradation at 205oC. Even though, the CO2 loading of this adsorbent (~80 mg/g) is lower than that of PEI-MPS, it may be suitable for CO2 capture using fluidized bed reactor. Recent study indicated that the use of PEI-MPS for CO2 capture reduced ~46% regeneration energy in comparison with conventional 30% ethanolamine solution. This is due to the low heat capacity of solid adsorbent (~2.2 J/oC) and the avoidance of water vaporization. Mesoporous silica is produced using sodium silicate; cheap silica precursor therefore resulting aminofunctionalized mesoporous silica could be inexpensive and suitable CO2 capture. Highly stable adsorbent with significant reduction in energy consumption is a basis for an advanced CO2 capture process.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Earth Science & Climatic Change.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Earth Science & Climatic Change
  • SubjectEnvironmental & Earth Sciences
  • BylineArticles whose byline prints “Mohammad R M Abu Zahra”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels