Conference abstract · 2 Oct 2017
Research articlePublished 28 Apr 2021
Tuning of PID controller using multiple dominant poleplacement technique for stable third order processes
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The current study proposes PID controller tuning for stable Third Order plus Time Delay (TOPTD) and Third Order plus Time Delay with a Zero (TOPTDZ) systems. The Multiple Dominant Pole Placement (MDP) Method is used to build the PID Controller. The performance of the suggested Controller is evaluated utilising errors such as Integral Square Error (ISE), Integral Absolute Error (IAE), and Integral Time Absolute Error (ITAE) on linear models of TOPTD and TOPTDZ and non-linear models such as isothermal CSTR and bio-reactor (ITAE). Using Kharitonov's theorem, the performance under model uncertainty is also seen when one parameter is perturbed at a time. The proposed MDPPID controller is compared to controllers built using performance specifications such as Overshoot (Shamsuzzoha 2013), IMC technique (Zhi-cheng et al., 2010; Shamsuzzoha and Lee, 2007), and Direct Synthesis Method (DSM) for stable TOPTD/TOPTDZ systems (Chidambaram, 1998; Chen and Seborg, 2002; Seshagiri rao Chidambaram,2006) and for model uncertainty. The efficiency of the suggested technique is demonstrated by simulation results on a variety of case studies of stable TOPTD, TOPTDZ, and non-linear models, which indicate that the proposed MDP-PID controller outperforms the other methods. For decades, the omnipresent PID controller has been the most frequently used process control method. Although sophisticated control approaches such as model predictive control can give substantial benefits, for the great majority of industrial control loops, a well-designed and tuned PID controller has shown to be sufficient. The vast literature on PID controllers covers a wide range of design and tuning techniques based on various performance criteria. 3-6 Ziegler and Nichols (ZN)7 and Cohen and Coon (CC)7 described two early and well-known design approaches. 8 Both techniques were created to offer a quarter decay ratio closed-loop response. Design relations based on integral error criteria9-11, as well as gain and phase margin formulas, are other well-known formulae for PI controller design. 12 PID controllers are commonly designed using a time-domain or frequency-domain performance criterion. The relationships between the closed-loop system's dynamic behaviour and these performance indices, on the other hand, are not straightforward. The controller design in the direct synthesis (DS) approach13-15, on the other hand, is based on a desired closed-loop transfer function. The controller is then analytically computed so that the closed-loop set-point response is identical to the desired response. The direct synthesis technique has the apparent benefit of including performance criteria directly through the design of the closed-loop transfer function. Choosing closed-loop poles is one approach to specify the closed-loop transfer function. It's based on a first-order plus time delay model with a significant time delay
Subjects
ChemistryAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 2 Oct 2017
Comparison of pid parameter using multiple dominant poleplacement technique with other techniques for stable third order processes
Conference abstract · 13 Jun 2016
Automation of industrial processes using fractional order controllers tuned by swarm intelligence techniques
Research article · Mar 2014
Control of a Nonlinear Spherical Tank Process Using GA Tuned PID Controller
Research article · Jan 2014
A Comparison of PID Controller Tuning Methods for Three Tank Level Process
More from this journal
The newest in Journal of Chemical Technology and Applications.
Rapid communication · 31 Jan 2025
Fermentation and Downstream Processing: The Core of Biomanufacturing
Rapid communication · 31 Jan 2025
Chemical Technology: Bridging Science and Industry
Short communication · 31 Jan 2025
Biochemical Engineering: Merging Biology with Technology
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Chemical Technology and Applications
- SubjectChemistry
- BylineArticles whose byline prints “Ch. V. Naga Sowjanya”

