Research article · 30 Apr 2015
Conference abstractPublished 13 May 2019
Reduction of wear in vehicle pistons with copper oxide effect and extension of motor life
Eyuboglu College, Turkey
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Our vehicles equipped with internal combustion engines facilitate a significant part of our lives and are used in every area from transportation to industry, from trade to health. However, increasing the efficiency of these engines will contribute both economically and to the environment positively. The frequent maintenance periods of the internal combustion engines increase the operating costs and shorten the service life. The heat caused by friction causes the gap between the metal atoms of the piston and the oxygen molecules that fill the cavities prevent the closure of cracks and disrupt the integrity of the metal. This distortion leads to fracture cracking and this leads to abrasion. Wear is a major problem in the engine and the revision costs of the engine increase due to wear. In order to prevent erosion during the literature review of our project, we concluded that we should first prevent oxygen atoms from entering the piston. Many oils and additives are now used to prevent the introduction of oxygen molecules between metal atoms. Increasing the efficiency of these additives and finding new additives, increasing the efficiency of internal combustion engines or wherever the friction effect is seen means lowering the cost. Thanks to the copper oxide solution, our new lubricating liquid covers the pistons or the metal exposed to the friction and prevents the filling of the gaps during expansion by filling with oxygen atoms, thus preventing the onset of abrasion. The results of the surface roughness tests we conducted before and after the experiments support our idea and show that our experience was successful. Our lubricating fluid, which is more efficient than other oils, can be used in all metals and does not damage metals in the long term and its cost, is lower than other oils and additives.
Ask about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 1 Dec 2016
Characterization of wear mechanisms occurring on piston ring and cylinder bore of the internal combustion engine
Conference abstract · 1 Dec 2016
Layer Protection of Oil Additives, Lubrication-Friction-Wear within Surface Coatings of Piston Rings against Cylinder Liner in Internal Combustion Engines
Conference abstract
Reduction of healthcare-associated infections in a long-term care brain injury ward by replacing regular linens with biocidal copper oxide impregnated linens
Research article · 25 Nov 2019
The Study of Tribological Properties in Conjunction with a Radial Piston Motor and How its Knowledge can be Utilised to Improve Efficiency of the Motor and Thence the System
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- BylineArticles whose byline prints “Ilyas Seckin”
